Using Remote Printer (Netware 3.1X/4.1X/5.X) - Epson EpsonNet C82391 Series Administrator's Manual

Using Remote Printer (NetWare 3.1x/4.1x/5.x)

This section contains instructions on using the interface card in
Remote Printer mode under NetWare 3.1x, 4.1x, 5.x, or
IntranetWare.
First, you need to make printer environment using PCONSOLE
or NWAdmin (NetWare Administrator tool). See the target
section to make printer environment.
NetWare 3.1x
"Making the printer environment with PCONSOLE" on page
4-19.
NetWare 4.1x/IntranetWare
"Making the printer environment with Bindery mode" on
page 4-22.
NetWare 4.1x/IntranetWare/NetWare 5.x
"Making the printer environment with NDS mode" on page
4-25.
Note:
Be sure that the one of the following Clients is installed in your computer;
Novell Client 32 or Novell IntranetWare Client.
4-18
Settings for NetWare