Removal steps of the memory module
Note: If only one memory module is used on the computer you are servicing, the card must be installed in
SLOT-0 (
a
: lower slot), but not in SLOT-1 (
When installing: Insert the notched end of the memory module into the socket. Press the memory module
firmly, and pivot it until it snaps into the place. Make sure that it is firmly fixed in the slot and does not
move easily.
1060 Fan assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 58
•
"1030 Thermal cover" on page 59
Attention:
• Do not handle the fan roughly. Improper handling of the fan can cause distortion or deformation and
imperfect contact with components.
• Do not touch or apply any excessive force to the fan motor. It might cause damage to the fan assembly or
the computer to mulfunction.
62
Hardware Maintenance Manual
b
: upper slot).
b
a