Table of Contents
Advertisement
Quick Links
PRODUCT DESCRIPTION – The SHUTTLE
of our widely acclaimed SHUTTLE
amplifiers. This model has been designed with our unique ULTRA LIGHT
unified design process, yielding a 600 watt professional high powered tour-class
bass guitar amplifier, weighing only 3.75 lbs! This 2nd generation SHUTTLE
amplifier now incorporates our unique 3-Dimensional Power Management
circuitry along with other enhancements like increased tube gain and high
efficiency thermal management.
Our proprietary 3DPM™ technology insures greater and more solid sounding
output while retaining the feel and playability of a more traditional tube based
power amplifier. When driving the power amp hard the player can feel
increased heft and girth of the individual notes, while maintaining dynamics and
articulation. The result is an amplifier that achieves a more 3 dimensional tone
and feel, like a tube amplifier power section, without the anemic flatness other
amplifier designs can exhibit. This compact design blends the best of analog
and digital platforms to produce the ultimate in warmth, punch and power.
®
The SHUTTLE
6.2 is equipped with a ¼" unbalanced instrument input, preamp
stage clip detector, mute switch with LED indicator, 12AX7 tube preamp with
extended range variable input gain, 3 switched signal shape filters with LED
indicators, 3 band active equalization with sweepable midrange frequency,
master volume control, proprietary 3DPM™ power management, ¼" tuner
output, aux. input, effects loop, balanced direct out with ground lift/pre-post/mic-
line switches, headphone output, and 2 Neutrik NL-4 "Speak-On"™ speaker
jacks.
The power amp is a powerful, light weight Class D design and is supported by a
state-of-the-art high frequency Switch Mode Power Supply (SMPS), which does
away with the weight of a traditional power transformer. The SHUTTLE
power supply is usable from 100-240 volts, lending itself well to international
touring players.
Owner's Manual
Model# STL6-2
®
6.2 represents the 2nd generation
®
series of light weight, high output bass
®
®
6.2's
1
Model# STL6-2-210T
Model# STL6-2-12T
Advertisement
Table of Contents
Related Manuals for Genz Benz SHUTTLE 6.2
Summary of Contents for Genz Benz SHUTTLE 6.2
- Page 1 Owner’s Manual Model# STL6-2 ® PRODUCT DESCRIPTION – The SHUTTLE 6.2 represents the 2nd generation ® of our widely acclaimed SHUTTLE series of light weight, high output bass amplifiers. This model has been designed with our unique ULTRA LIGHT unified design process, yielding a 600 watt professional high powered tour-class ®...
- Page 2 FRONT PANEL ® INPUT – The SHUTTLE 6.2 is equipped with a standard ¼” unbalanced input. The input sensitivity range is from 40 mV to 1.6 volts. The input impedance is >500K ohms. The input stage contains a precision high order active high pass filter (more effective and less intrusive than the more common 6 dB filters) and an “RFI”...
- Page 3 ® ACTIVE EQUALIZATION – The SHUTTLE 6.2 contains an active 3 band equalizer with sweepable parametric mid range frequency control. This equalizer, similar to those found on professional sound consoles, is a very useful tool. The low frequency EQ section is an 80 Hz shelving curve with 15dB of cut or boost. The high frequency EQ section is a 4 KHz shelving curve with 15dB of cut or boost.
- Page 4 REAR PANEL DIRECT OUTPUT – An XLR balanced direct output is provided for connection to a PA system or directly into a recording studio console or A/D converter. The Direct Out signal may be switched between mic and line level, pre and post EQ, and the audio signal ground may be connected or lifted from pin 1 to eliminate hum due to ground loops.
- Page 5 FAN COOLING – The chassis is cooled via a thermal sensing fan design. The fan is always ON but will increase in speed as demand on the amp increases. Do not obstruct the left or right chassis vents. ® SPEAKER OUTPUTS – The SHUTTLE 6.2 provides two Neutrik Speak-On™...
-
Page 6: Block Diagram
STL6-2-12T COMBO - This model produces 375 watts into the 8 ohm combo configuration and 600 watts when used with an additional 8 ohm extension cabinet. It will be necessary to use a Neutrik Speak-On™ connection when using an extension cabinet with this combo. The speaker is our proprietary high power GBE 12350, high energy 12” Neodymium cast frame driver coupled with our GBE 4941 tweeter. - Page 7 WARNING! • The use and operation of this device constitutes an agreement of full release of any and all liability connected with its use. Only persons familiar with the operation of high-powered professional audio equipment should attempt to operate this device. •...
Need help?
Do you have a question about the SHUTTLE 6.2 and is the answer not in the manual?
Questions and answers