Yamaha RX-V571 Owner's Manual page 21

Connecting a TV
®
@
Turn on the playback devices, and then confirm the following:
Unit: Whether the input signals from the playback devices are selected as the HDMI
input source (any of "HDMI 1-5")= When it is not selected, select the correct input
source manually.
TV: Whether the video signals from the playback devices are displayed on the TV
screen.
Confirm whether the unit is linked with operations of the TV remote control as follows:
Turning on/standby, volume control and selecting audio output devices.
If these operations are not available, confirm that "HDMI Control" in the "Setup" menu
is set to "On."
All settings have been completed.
When a TV program is selected with the TV's remote control, the input source of the
unit is switched to "AV4" automatically, and TV sound is output.
When these operations are not linked, confirm that "HDMI Control" in the "Setup"
menu is set to "On="
• When the HDMI control function does not work correctly, it may be effective to turn off the devices to
reset or plug in the power cable and retry with the power cable plugged in.
• If the power-on operation is not linked, confirm the priority of audio output settings for the TV.
Connection method 3 (TV with HDMI input jacks)
Connect a TV to the unit with an HDMI cable and an optical cable.
HDMI OUT jack
The unit (rear)
HDMI input
AV4 (OPTICAL) jack
Audio output
(Digital optical)
TV
By switching input source into "AV4" with AV4 key on the remote control or SCENE. TV
sound is output from the unit.
• "AV4" is selected as input sound source from a TV as the default setting. When the AV4 jack is used
for another device, select an input jack to be used for the TV audio in "TV Audio Input" of the "Setup"
menu. Also, when using the SCENE functions (p.35), register the appropriate input source for SCENE
(TV).
• When connecting a TV to the unit with an HDMI cable, video signals from all types of the video input jacks
can be output from the HDMI OUT jack. For more details, refer to "Video signal flow" (p.91).
• By connecting a TV to the unit with an HDMI cable, each function for the unit can be configured while
viewing the TV monitor (p.63).
• When the AV4 jack is used for another device, or another terminal, except when an OPTICAL jack (with an
optical cable) is used for inputting TV sound, select another jack (any of AV 1-6 or AUDIO) for the
connection. Also, set the input sources setting of SCENE (TV) (p.35).
En
21