Samsung Series6 650 PN50A650 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Plasma TV
  5. Series6 650 PN50A650
  6. User manual
Samsung Series6 650 PN50A650 User Manual

Samsung Series6 650 PN50A650 User Manual

650 series 6
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comment contacter Samsung dans le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service
Coneommateurs Samsung.
CANADA
_a_
_ _ _
_,
we6 i_,
Samsung Electronics Canada Inc., Customer Service 55
Standish Court Mississauga, Ontario L5R 4B2 Canada
1-800-SAMSUNG (7267864) www.samsung.com/ca
Samsung Electronique Canada Inc., Service a la Clientele
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
U.S.A
1-800-SAMSUNG (7267864) www.samsung.com
Samsung ElectronicsAmerica, Inc. 105 Challenger Road
Ridgefield Park, NJ 07660-0511
the possibilities
Thank you for purcnasing this Samsung product.
To receive
more
comDle!:e
service,
please
reg s!:er your
product
al:
www.samsung.com/global/register
Model
Serial No.
BN68-01532A-01
aN68
015_2A
Engindb
1
2008
04
18
2#
8:36:135

Advertisement

Table of Contents
loading

Related Manuals for Samsung Series6 650 PN50A650

Summary of Contents for Samsung Series6 650 PN50A650

  • Page 1 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Coneommateurs Samsung.
  • Page 2 On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty. U.S.A Only...
  • Page 3 i User instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, refer to page 32 of this manua! to reduce the degree of brightness and contrast of the screen when displaying a stitt image.

  • Page 4: Table Of Contents

    i Contents [] Checking the DigitaFSignal Strength ......[] List of Features ............. B Accessories ..............B Using Your TV as a Computer (PC) Display ....49 [] Viewing the Control Panel ..........[] Viewing the Connection Panel ........[] Display Modes ............Remote Control .............

  • Page 5: List Of Features

    i General information List of Features . Adjustable picture settings that can be stored in the TV's memory. . Automatic timer to turn the TV on and off. . A special sleep timer. . V-Chip function. . Excellent Digital interface & Networking With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite...

  • Page 6: Viewing The Control Panel

    Viewing the Control Panel Buttons on the Lower=Ri_qht Part of the Panel The buttons on the lower-right panel control your TV's basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. = ......................, :Zp-e S/IMSUN6 Front...

  • Page 7: [] Viewing The Connection Panel

    Uses a 75D Coaxial connector for an Air/Cable Connect the supplied power cord. Network. Connect a LAN cable to this port to connect to the D}G}TAL AUDIO OUT (OPTICAL) Network (SAMSUNG's InfoLink Service). (See page 89) Connect to a Digital Audio component. AUD}O OUT (R/L)

  • Page 8: Remote Control

    Turns the TV on and off. WlSELINK and Anynet+ modes. (1_: This remote can be used POWER O TV to control recording on Samsung Selects the TV mode directly. recorders with the Anynet+ feature) NUMERIC BUTTONS 0N/0FF (_ _ ONIOFF E2g>-...

  • Page 9: Installing Batteries In The Remote Control

    Installing Batteries in the Remote Control Lift the cover at the back of the remote control upward as shown in the figure. Insta!l twoAAAsize batteries. Make sure to match the "+" and "-" ends of the batteries with the diagram inside the compartment.

  • Page 10: Connecting Cable Tv

    Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box Plug the incoming cable into the ANT IN terminat on the back of the TV. Because this TV is cable-ready, you do not need a cabte box to view unscrambled cabte channels.

  • Page 11: [] Connecting A Dvd Player Or Cable Box / Satellite Receiver (Set-Top Box) Via Hdmi

    Connecting a DVD Player or Cable Box ! Satellite receiver (Set-Top Box) via HDlVll This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture. Connect an HDMI Cable TV Rear Panel TV Side Panel between the HDMI IN (1,2, 3...

  • Page 12: Connecting A Dvdplayeror Cablebox/ Satellitereceiver(Set-Top Box)Via Component C Ables

    Connecting a DVDPlayeror CableBox/ Satellitereceiver(Set-Top Box)via Component c ables The rear panel jacks on your TV make it easy to connect a DVD Player/Cable Box/Satellite receiver (Set-Top Box) to your TV. Connect a Component Cable TV Rear Panel between the COMPONENT IN (1 or 2) [Y, PB, PR] DVD Player or Cable Box /...

  • Page 13: Connecting A Vcr

    ;'_ When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). S-Video Connection Your Samsung TV can be connected to an S-Video jack on a VCR.

  • Page 14: Connecting A Digital Audio System

    Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to your Connect an Optical Cable between the DIGITAL AUDIO TV Rear Panel OUT (OPTICAL) jacks on Digital Audio System the TV and the Digital Audio Input (OPTICAL)jacks...

  • Page 15: Connecting A Pc

    Connecting a PC Using the D-Sub Cable Using the D-Sub Cable TV Rear Panel Connect a D-Sub Cable between PC IN [PC] jack on the TV and the PC output jack on your computer. Connect a PCAudio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.

  • Page 16: B Turning The Tv On And Off

    i Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. _,_ It may take a while when your TV starts. Plug & Play Feature The first time you turn on your new TV, choose your basic settings for language, input source and channels, and...
  • Page 17 The TV will begin memorizing all of the available channels. After all the available channels are stored, the TV starts to remove scrambled channels (see page 47). The Auto program menu then reappears. Press the ENTER button when channel memorization is complete.

  • Page 18: B Changing Channels

    If you want to reset this feature... Press the MENU button to display the menu. Press the ,& or T button to select Setup, then press the ENTER button. Press the ENTER button to select Plug & Play. For further details on setting up options, refer to the pages 16~17.

  • Page 19: B Adjusting The Volume

    Adjusting the Volume _the Volume Buttons ..1I ..r- ..........Press the VOL _] or VOL -_j button to increase or decrease the volume. MUTE ;'_ To turn the volume up, turn the wheel clockwise when the Volume OURCE Control window is displayed.

  • Page 20: [] Using The Remote Control Backtight Buttons

    Using the Remote Control Backlight Buttons Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly. 1. Press the ON/OFF {_ light button Pressing the ON/OFF @ light button toggles between ON and OFF. When ON, the button backtight is turned on for a moment.
  • Page 21 Easy Setting Press the TOOLS button on the remote control. Press the A or T button to select Switch to Cable or Switch to Air. Press the ENTER button. Channels in Memorv_ Press the MENU button to display the menu. Press the A or T button to select Channel, then press the ENTER button.

  • Page 22: To Select The Source

    To Select the Source Use to select TV or other e×ternal input sources such as DVD players or Cable Bo×/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. Press the MENU button to display the menu. Press the A or T button to select Input, then press the ENTER button.

  • Page 23: Changing The Picture Standard

    i Picture Control Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. Press the MENU button to display the menu. Press the ENTER button to select Picture. Press the ENTER button to select Mode. Press the A or T button to select Dynamic, Standard, or Movie.

  • Page 24: Adjusting The Detailed Settings

    Adjusting the Detailed Settings Samsung's new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. Detailed Settings Press the MENU button to display the menu. Press the ENTER button to select Picture.
  • Page 25 _the Color Space Color space is a color matrix composed of red, green and blue colors. Select your favorite cotor space to experience the most natura! color. 10 Press the _, or T button to select Color Space, then press the ENTER button. 11 Press the ENTER button again to select Color Space.
  • Page 26 White Balance You can adjust the color temperature for more natural picture colors. 17 Press the A or T button to select White Balance, then press the ENTER button. 18 Select the required option by pressing the A or T button, then press the ENTER button.

  • Page 27: B Configuring Picture Options

    Activatin9 xvYCC Setting the xvYCC mode to On increases detail and color space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. 24 Press the A or T button to select xvYCC, then press the ENTER button. 25 Press the A or T button to select Off or On.
  • Page 28 Chart igiEg the Screen Size Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well.
  • Page 29 16:9 Zoom1 Zoom2 The screen size when Sets the picture to 16:9 The screen size wnen wlae moae. Wide screen is venlca the Zoom1 screen is entargea vertically enIargea. Wide Fit 4:.__3 Just Scan Use this function [c see me Entarges the aspec[ ratio Sets the picture to 4:3 of the oicture to fit the...
  • Page 30 DNle Di ital Natural Ima e en ine This TV includes the DNle function to provide high visual quality. If you set DNle to on, you can view the screen with the DNle feature activated. Follow the Activating Picture Options instructions numbers 1 and 2.
  • Page 31 _the Film Mode The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality. Fottow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 27) Press the ,& or T button to select Film Mode, then press the ENTER button. Press the A or T button to select Off or Auto, then press the ENTER button.
  • Page 32 Reducin_ the Effects of Screen Burn If screen burn has occurred, you can select a white screen or scrolling to help remove screen burn artifacts. Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 27) Press the _, or _' button to select Screen Burn Protection, then press the ENTER button.
  • Page 33 Screen Burn-in To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes.

  • Page 34: [] Resetting The Picture Settings To The Factory Defaults34

    Resetting the Picture Settings to the Factory Defaults To select the desired picture mode, follow the Changing the Picture Standard instructions numbers 1 and 2. (see page 23) Press the A or T button to select Picture Reset, then press the ENTER button. Press the _ or _ button to select OK or Cancel then press the ENTER button.
  • Page 35 the Position of the PiP Window Press the A or T button to select Position, then press the ENTER button. Press the A or T button to select the desired PIP window position, then press the ENTER button. In Double Window ( rT'] ) and Double Wide ( _=1 ) modes, Position cannot be selected.

  • Page 36: Changing The Sound Standard

    i Sound Control Changing the Sound Standard You can select the sound mode to best suit the programming you're watching. Press the MENU button to display the menu. Press the ,& or T button to select Sound, then press the ENTER button. Press the ENTER button to select Mode.

  • Page 37: Setting The Trusurround Xt

    Press the _, or T button to select a particular frequency to adjust. Press the _ or _ button to increase or decrease the levet of the particular frequency. , Mode; Selects the sound mode among the predefined settings. • Balance L/R: Adjusts the balance between the right and left speaker. , Bandwidth Adjustment (100Hz, 300Hz, lkHz, 2kHz, 3kHz, !0kHz): To adjust the level of different bandwidth frequencies.

  • Page 38: B Choosing Preferred Language

    Choosing Preferred Language The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). Preferred lan ua • Press the MENU button to display the menu. Press the A or T button to select Sound, then press the ENTER button.

  • Page 39: [] Automatic Volume Controt

    Automatic Volume Control Reduces the difference in volume level among broadcasters. Press the MENU button to display the menu. Press the A or T button to select Sound, then press the ENTER button. Press the A or T button to select Auto Volume, then press the ENTER button.

  • Page 40: Listening To The Sound Of The Sub (Pip) Picture

    Listening to the Sound of the Sub (PIP) Picture When the PiP feature is activated, you can listen to the sound of the sub (PIP) picture. Press the MENU button to display the menu. Press the ,& or T button to select Sound, then press the ENTER button.

  • Page 41: B Managing Channels

    i Channel Control Managing Channels Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. Viewing All Channels Show all currently available channels. To use the Channet List function, first run Auto Program (see page 21).
  • Page 42 Erasin_ Channels Youcan delete or add a channel to display the channels you want. Press the MENU button. Press the A or T button to select Channel, then press the ENTER button. Press the _, or T button to select Channel List, then press the ENTER button. Press the -,4 button to select Added Channels.
  • Page 43 _Your Favorite Channels You can set channels you watch frequently as favorites. Press the MENU button. Press the _, or T button to select Channel, then press the ENTER button. Press the A or T button to select Channel List, then press the ENTER button. Press the _ button to select Added Channels.
  • Page 44 Reservin a Pro ram TimeViewin If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a program, set the current time first. See pages 52~53. Reserved chanets can only be set if they are in the Channel List (See page 41 ).
  • Page 45 Confirmin a Viewin Reservation You can view, modify or delete a reservation. Press the MENU button. Press the A or _' button to select Channel, then press the ENTER button. Press the A or T button to select Channel List, then press the ENTER button. Press the _ button to setect Added Channels.
  • Page 46 _Channels - Analog Channels can labeled so that their call letters appear whenever the channel is selected. Press the MENU button. Press the J, or T button to select Channel, then press the ENTER button. Press the _, or T button to select Channel List, then press the ENTER button.

  • Page 47: Clearing Scrambled Channels - Digital

    Clearing Scrambled Channels - Digital The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20-30 minutes. Press the MENU button. Press the A or T button to select Channel, then press the ENTER button.

  • Page 48: [] Checking The Digitafsignal Strength

    Checking the Digital=Signal Strength Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.

  • Page 49: B Using Your Tv As A Computer (Pc) Display

    However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) First, click on Control Panel on the Windows start menu.

  • Page 50: Setting Up The Tv With Your Pc

    Setting up the TV with your PC Now to Auto Adjust Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. Press the MENU button to display the menu.
  • Page 51 the Screen Position Adjust the PC's screen positioning if it does not fit the TV Screen. Preset: Press the SOURCE button to select PC mode. Press the MENU button to display the menu. Press the A or T button to select Picture, then press the ENTER button. Press the A or T button to select Screen, then press the ENTER button.

  • Page 52: Setting The Time

    i Time Setting Setting the Time Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the iNFO button.) 0 tion 1'. Settin the Clock Manuall Press the MENU button to display the menu.
  • Page 53 the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. Press the MENU button to display the menu. Press the A or T button to select Setup, then press the ENTER button. Press the ,& or T button to select Time, then press the ENTER button. Press the ENTER button to select Clock.
  • Page 54 Setting the On/Off Timer Use this feature to set the TV to turn on or off at a desired time. You must set the clock first. Press the MENU button to display the menu. Press the A, or T button to select Setup, then press the ENTER button. Press the A or T button to select Time, then press the ENTER button.
  • Page 55 Settin theSlee Timer The sleep timer automatically shuts off the TV after a preset time (30, 60, g0, 120, 150 and 180 minutes). Press the MENU button to display the menu. Press the _, or T button to select Setup, then press the ENTER button. Press the ,&...

  • Page 56: Selecting A Menu Language

    i Function Description Selecting a Menu Language Press the MENU button to display the menu. Press the & or 'V' button to select Setup, then press the ENTER button. Press the A or T button to select Language, then press the ENTER button. Press the A or T button to select the appropriate language: English, Espa_ol, or Fran_ais, then press the ENTER button.

  • Page 57: Using The V=Chip

    Using the V=Chip U.S.A Only Th s product s covered by the fo ow ng U.S. patents : US4,930_158 US4_930_160 The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PiN (personal ID number) before any of the V-Chip restrictions are set up or changed.
  • Page 58 How to Enable/Disable the V-Chip Press the MENU button to display the menu. Press the _, or T button to select Setup, then press the ENTER button. Press the ,_, or _' button to select V-Chip, then press the ENTER button. The message Enter PIN wilt appear.
  • Page 59 The TV Parental Guidelines screen will appear. Press the _, or T button to select one of the six aged based categories: o TV-Y: All ch dren. The themes and elements in this program are specifically aesignea for a very young audience, including children from ages two to six •...
  • Page 60 How to Setud_ Restrictions Using"MPAA Ratin s" G, PG, PG-i3, R, NC-i7, X, NR The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).
  • Page 61 Now to Set u_ Restrictions Usin_lish" Press the MENU button to display the menu. Press the A or T button to select Setup, then press the ENTER button. Press the A or T button to select V-Chip, then press the ENTER button. The message Enter PIN witl appear.
  • Page 62 Nowto Set u Restrictions Usin "Canadian French" Press the MENU button to display the menu. Press the _, or T button to select Setup, then press the ENTER button. Press the ,_, or T button to select V-Chip, then press the ENTER button. The message Enter PIN wilt appear.
  • Page 63 Usin the V-Chi for Di 13al c hannels Parental restriction information can be used while watching DTV channels. Press the MENU button to display the menu. Press the ,& or T button to select Setup, then press the ENTER button. Press the A or T button to select V-Chip, then press the ENTER button.
  • Page 64 N__nnel "Emer enc Esca e" If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: Press the ENTER button to select OK. To resume normal viewing, tune to a different channel using CH A or CH v button.

  • Page 65: Viewing Closed Captions (On=Screen Text Messages) =Digital

    Viewing Closed Captions (On=Screen Text Messages) =Digital The Digital Captions function operates on digital channels. Press the MENU button to display the menu. Press the ,& or T button to select Setup, then press the ENTER button. Press the A or T button to select Caption, then press the ENTER button.

  • Page 66: [] Viewing Closed Captions (On-Screen Text Messages) - Analog

    !! ,ilV! w£C ......The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an e×ternal device. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) Press the MENU button to display the menu. Press the ,&...

  • Page 67: Adjusting The Tv On/Off Melody Sound

    Adjusting the TV On/Off Melody Sound The TV power on/off melody sound volume can be adjusted. Press the MENU button to display the menu. Press the A or T button to select Setup, then press the ENTER button. Press the A or T button to select External Settings, then press the ENTER button.

  • Page 68: Setting The Entertainment Mode

    Setting the Entertainment mode The Entertainment mode enables you to select the optimal display and sound for sports, cinema and games. Press the MENU button to display the menu. Press the A or 'V' button to select Setup, then press the ENTER button. Press the A or T button to select Entertainment, then press the ENTER button.

  • Page 69: Upgrading The Software

    Upgrading the Software Samsung may offer upgrades for your TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port.

  • Page 70: B Using The Wiselink Function

    Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. Do not disconnect the USB device while it is loading.

  • Page 71: Using The Photo List

    Using the WISELINK Menu Press the MENU button. Press the A or T button to select Application, then press the ENTER button. Press the _, or T button to select WISELINK, then press the ENTER button. The WISELINK menu is diplayed. i .
  • Page 72 Currently selected photo Shows the currently setected photo. Photo Information Window Shows information about the currently selectedphoto. You can change the Color, Compositon, and Favorite. Current Sort Standard Press the • or T button to change the standard for sorting photos. (Monthly, Timeline, Color, Composition, Folder,...
  • Page 73 Sorting_ Photo List You can sort photos in the Photo List by a particular standard. Press the W.LINK button on the remote control to display the WISELINK menu. Press the _ or _ button to select Photo, then press the ENTER button. Photo files are displayed.
  • Page 74 Color Sorts photos by color. You can change the photo color information. Select Color as the sorting standard in the Photo List. Press the _ or _ button to select from the sublist of files grouped by color. To move to the previous / next group, press the _(REW) or _-_ (FF) button.
  • Page 75 Folder Sorts photos by folder. If there are many folders in USB, the photos files are shown in order in each folder. The photo file in the Root folder is shown first and the others are shown in alphabetical order by name. Select Folder as the sorting standard...
  • Page 76 the Photo flies Press the 41 or I_ button to select the desired photo in the Photo list. Press the TOOLS button. Press the _, or T button to select Delete, then press the ENTER button. The Selected File(s) : Delete this file? message appear. Press the 41 or I_-button to select OK, then press the ENTER button.

  • Page 77: Viewing A Photo Or Slide Show

    Viewing a Photo or Slide Show Viewin a Slide Show Press the W.LINK button on the remote control to display the WISELINK menu. Press the _ or _ button to move to Photo, then press the ENTER button. Photo files are displayed. Press the _i or _ button to select the desired photo in the Photo list.
  • Page 78 _hoto Press the W.LINK button on the remote control to display the WISEMNK menu. Press the 4 or _ button to move to Photo, then press the ENTER button. Photo files are displayed. Press the 41 or I_ button to select the desired photo in the Photo list.
  • Page 79 Zoom You can zoom into images in full screen mode. Press the _, or T button to select Zoom, then press the ENTER button. Press the _ or i_ button repeatedly to increase or decrease the Zoom effect. (xl -_ x2 -_ x4) To move the enlarged photo image, press the ENTER button, then press the A/T/-,4/_ buttons.
  • Page 80 Background Music Setting You can set the background music. Press the A or T button to setect Background Music Setting, then press the ENTER button. _,_ If you turn off the Background Music, even if the Background Music Settings have been set up, the background music will not be played.

  • Page 81: Using The Music List

    Using the Music List This menu shows MP3 files from among the files saved on a USB memory device. Press the W.LINK button on the remote control to display the WISELINK menu. Press the 4 or _,, button to select Music, then press the ENTER button. Music files are displayed.
  • Page 82 Sorting_Music List Youcan sort music files in the Music List by a particular standard. Press the W.LINK button on the remote control to display the WISELINK menu. Press the _t or _- button to select Music, then press the ENTER button. Music files are displayed.
  • Page 83 Mood Sorts music files by the mood. You can change the music mood information. Select Mood as the sorting standard in the Music List. Press the 4 or I_ buttons to select from the sublist of files grouped in alphabetical order.
  • Page 84 Folder Sorts music files by the folder. If there are many folders in USB, the files are shown in order in each folder. The music file in the Root folder is shown first and the others are shown in alphabetical order by name.
  • Page 85 Deleting-the Music files Press the _ or _* button to select the desired music in the music list. Press the TOOLS button. Press the _, or T button to select Delete, then press the ENTER button. ;_ The (for example) Selected File(s): Delete this file? message appear.

  • Page 86: Playing A Music File

    Playing a Music File Pia in a music file Press the W.LINK button on the remote control to display the WISELINK menu. Press the 41or 1_button to select Music, then press the ENTER button. Music files are displayed. Pressing the _,t or I_ button to select a music file to be played, then press the ENTER button.
  • Page 87 the selected music files Press the W.LINK button on the remote control to display the WISELINK menu. Press the 41 or _ button to select Music, then press the ENTER button. Press the 4! or _ button to select the desired music file, then press the yellow button.

  • Page 88: Using The Setup Menu

    Using the Setup Menu Setup displays the user settings of the WISELINK menu. Press the W.MNK button on the remote control to display the WISELINK menu. Press the 41 or I_ button to select Music, then press the ENTER button. Press the A or T button to select the desired option.

  • Page 89: Network Connection =Cable

    Network Settings and InfoLink To access Samsung's Infolink network feature, you must make one of the connections on the following pages. Network Connection =Cable LAN Connection for a DHCP Environment The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below.
  • Page 90 LAN Connection for Static IP Environment The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your lnternet Service Provider (ISP). Connect the [LAN] port on TV Rear Panel Port...

  • Page 91: Network Connection =Wireless

    You must use the Samsung Wireless LAN Adapter for lnfoLink(WtS-08BG) to use a wireless network. The Samsung Wireless LAN Adapter for InfoLink is sold separately. Contact a Samsung Electronics agent or service center for purchasing. To use a wireless network, your TV must be connected to a wireless IP sharer.

  • Page 92: Cable Network Setup

    Cable Network Setup > First, the Network selection must be set to CaMe. (See page 91) Auto Setup if you connect the LAN cane and it supports DHCP, the lnternet Protocol (IP) Settings are automatically configured. Please check if the LAN cable is connected. (See page 89) Press the MENU button to display the menu.
  • Page 93 Network Test You can test or confirm the network connection status after setting up the network. Press the MENU button to display the menu. Press the _, or T button to select Setup, then press the ENTER button. Press the _, or T button to select Cable Network Setup_ then press the ENTER button.

  • Page 94: Wireless Network Setup

    Wireless Network Setup > The menu is activated only if the Samsung Infolink Wireless adapter is connected. (See page 91) Auto Setup If you connect the LAN cable and it supports DHCP, the lnternet Protocol (IP) Settings are automatically configured.
  • Page 95 Access Point Select You can select the IP sharer to use when using a wireless network. Press the MENU button to display the menu. Press the _, or T button to select Setup, then press the ENTER button. Press the _, or T button to select Wireless Network Setup, then press the ENTER button.
  • Page 96 Network Test You can test or confirm the network connection status after setting up the network. Press the MENU button to display the menu. Press the A or T button to select Setup, then press the ENTER button. Press the A or T button to select Wireless Network Setup, then press the ENTER button.

  • Page 97: Using Infolink

    Using InfoLink You can view news, stock market and weather information services using SAMSUNG's lnfoLink service. Set up the network. (Refer to pages 92~96) The Caption witl not work when InfoLink is operating. Information provided by USA TODAY via Infotink is for the United States only. Information for other countries is not provided.
  • Page 98 _the Weather Service Press the INFO.L button on the remote control. Press the _ or I_ button to move to the Weather service and press the ENTER button. Set up the Region Press Yellow button. Input the postal (zip) code of the region by pressing the number buttons on the remote, then press the ENTER button.
  • Page 99 Usina the Stock Service Press the INFO.L button on the remote control. Press the -,q or I_ button to move to the Stocks service and press the ENTER button. Press the Red button while using the service to change the Stocks service option.

  • Page 100: Infolink Setup

    InfoLink Setup Press the INFO.L button on the remote control. Press the _ or _ button to select Setup, then press the ENTER button. Press the A or T button to select the desired option. (Auto Launch, Display Time, Font Size, Background Color, InfoLink's Position) Press the A or _' button to select an option, then press the ENTER button...

  • Page 101: What Isanynet

    Anynet+ with your Samsung TV's remote. Connecting Anynet + Devices The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.

  • Page 102: Setting Up Anynet

    Setting Up Anynet + The following settings help set the Anynet + functions. To use the An net+ Function, An net+ HDMI-CEC must be set to On Press the MENU button. Press the A or T button to select Application, then press the ENTER button.

  • Page 103: Recording

    The 823, _ operations may differ depending on the device. Recording can make a recording of a TV program using a Samsung recorder. Press the TOOLS button. Press the A or T button to select Recording Immediately and press the ENTER bl...

  • Page 104: Listening Through A Receiver (Home Theater)

    Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker. Press the TOOLS button. Press the A or T button to select Receiver, then press the ENTER button. Press the 4( or _ button to select to On, then press the ENTER button. Now you can tisten to sound through the receiver.

  • Page 105: [] Securing The Tv To The Walt

    i Appendix Securing the TV to the Wall Pulling, pushing, Or climbing On theTV may Cause the Tv to fai!. In particular: ensure your children de not hang over Or destabilize the TV; doing so may cause the TV to tip over, causing seriou s injuries or death. Follow all safety precautions provided on the included Safety Flyer, For added stability, install the antkfal! Caution...

  • Page 106: Troubleshooting

    Troubleshooting if the TV seems to have a problem, first try this list of possible problems and solutions. if none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Possible Solution Poor p_cturequau_y. Try another channek Adjust the antenna.

  • Page 107: [] Auto Wall-Mount Adjustment (Sold Separately) (Pn50A650T1F)

    Auto Wall=mount adjustment (Sold separately) (PNSOA650TI F) Once the auto wall mount is installed, the position of your TV can be easily adjusted. Auto Wall=Mount TV Rear Panel EX-LINK Cable (Not supplied) Entering the menu Press the _,, T, _ or _ button on your remote control. The Wall Mount Adjustment screen is displayed.

  • Page 108: Wall Mount Kit Specifications (Vesa)

    Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

  • Page 109: How To Attach The Stand=Base

    How to attach the Stand=Base Using the screws for securing the stand base and the monitor, firmly attach When mounting your TV on a wall, the monitor to the stand base. install the cover (O) on the stand-base (The exterior of the set may be different from the picture.) using two screws.

  • Page 110: [] Dimensions (Pn50A65Ot1F)

    REAR VIEW NOTE A drawJngsno_necessarytoscale Some dimel_s_ons _e subject _ochange without prior notice Refer to dimensions on each unit pno_to _}erforming any car_en_ No_iespo_sible fol typographical or pnnted errols © 2008 Samsung Electlonics Amelica 1no BN68 01532A Engindb 2008 8:39141...

  • Page 111: [] Dimensions (Pn58A650T1F)

    Dimensions (PN58AG50TI F) TOP VIEW FRONT VIEW ®®® ..JACK PANEL DETAIL 7.2 x 3.7 inches StDE ViEW "_:_" REAR VIEW NOTE Al_drawingsnotnecessarytoscale Some diraells ons are subject to char_ge witfieut prioTr_otce Refer to dimensions on each unit plol to perfolraing any carpen{_/ No__esponsSe for _ypographical or pllnted errols ©...
  • Page 112 The GNU General Public License (GPL) Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
  • Page 113 These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole_ and thus to each and every part regardless of who wrote it.
  • Page 114 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
  • Page 115 GNU Lesser General Public License (LGPL) Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble...
  • Page 116 TERMS AND CONDiTiONS FOR COPYING, DISTRIBUTION AND MODiFICATiON 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License").
  • Page 117 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with iL is called a "work that uses the LibraryL Such a work_ in isolation_ is not a derivative work of the Library_ and therefore falls outside the scope of this License.
  • Page 118 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein.
  • Page 119 END OF TERMS AND CONDiTiONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).

This manual is also suitable for:

Pn50a650t1fPn58a650t1f

Table of Contents