Firmware Upgrade - Samsung BD-P1500 User Manual

system LAr ar
J I _.J
Samsung may offer upgrades to your Blu-ray Disc Player'sfirmware in the future. To upgrade this firmware you must :
1. Go to samsung.com and refer to the 'SUPPORT' page to download the latest firmware.
You can use a CD or a USB flash drive to perform the firmware upgrade. For more information, see "Upgrade
Manual" at the website mentioned above.
or
2. Connect this player's LAN terminal to the LAN terminal on your modem (seepage 28) and follow the steps below.
FIRMWARE UPGRADE
1. With the unit in Stop mode/No Disc mode, press the MENU
button.
2. Press the AT buttons to select Setup, then press the ENTER
or _ button.
3. Press the • T buttons to select System Setup, then press the
ENTER or _- button.
4. Press the A T buttons to select System Update, then press the
ENTER or _- button.
5. The player will check the cable or network connection status
automatically. The connection checking window will be displayed.
[] Ifthe upgrade is possible : You will see information on the
current and new versions of firmware in a message box.
[] Ifthe upgrade is not possible : You will see the following
description in the message box.
• Ifthe cable is not connected :
"Ethernet cable is not connected. Please, check the
Ethernet cable"
• Ifthe network connection has failed :
"This system cannot connected to internet for update.
Please, check the network setup"
• If no latest version is released (the latest version has been
already installed) :
"The latest version of the firmware is already installed.
There is no need to update."
• Ifthere is a disc in the player :
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the unit to perform the update.
• Ifthe server service is not available :
" Update Server is under maintenance. Please try again later."
48_ system upgrade