REATTACHING
THE REFRIGERATOR
DOORS
Assemble
the Refrigerator
doors
t Reattach two flat head screws(_)
and two hex head
screws((_) to the hinge completely.
@
@
2 Place the hole in the bottom of the door((_)over the lower
hinge ((_)
(_Be
aware not to miss the hinge cap because
can
it
be easily taken off,
3, Insert the upper hinge shaft(_)
into the hose on the
corner of the Refrigerator door(_),
Make sure the hinge
is level between the upper hinge hole((_) and the hole of
the cabinet((_) and reattach the hinge screws(_)
and
ground screw((_) by turning in a clockwise direction_
Reconnect the wires,
®
4,, Place the front edge of the top table(@) on the front of the
upper hinge(@) and reattach with three screws,
_}
When reattaching the top table,
sure
make
that the
wires are not pressed or damaged by the top table,
Setling Up 11