GE VG2050 User Manual page 20

The Set Auto Repeat dialog box will ask for a loop end time to
be specified:
AUTO REPEAT
Set the length of time
you want the tape to
play in a repeating loop
Loop from 0:00 to -:--
(h:mm)
Press CLEAR to turn off
Press MENU to exit
The CLEAR key will erase all three numbers entered and
move the cursor back to the first position (hours).
The "Press CLEAR to turn off" message will appear only
after the first number has been entered into the end time.
Auto Repeat is set back to -:-- by resetting the dialog box, by
cassette ejecting or insertion, by powering off the VCR, by
power interruption, or by recording start.
When a duration time has been set:
The VCR will automatically switch to rewind if the counter
meets or goes past the Auto Repeat set duration,
The VCR will automatically switch to playback during rewind if
the counter equals or is less than O:OO.
The Auto Repeat may be adjusted by setting the counter to
OO:O0.This can be done by pressing the CLEAR button while
the tape counter is on screen or on the front panel display.
The counter will not reset while rewinding in an Auto Repeat
loop.
18