GE VG2044 User Manual page 7

STEP 4: Plug in the VCR
Match the wide blade of the plug with the wide slot in the
outlet. Be sure to insert the plug completely.
STEP 5: Tune the TV
Tune theTV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or theTV's video input.
If you connect your VCR using the ANTENNA connectors
with RF coaxial cable, set the 3 CH. 4 switch to channel 3 or
channel 4 -- the channel you want to use on yourTV.
If you connect your VCR using the AUDIO/VIDEO jacks with
audio/video cables, select theTV's video input to see the
signal. See the TV Owner's Manual.
STEP 6: Turn on the VCR
Press POWER to turn on the VCR.
STEP 7: Access the menus
The MENU and number buttons let you access, select and change
menu items. For example, to change the Auto Play seLLing, you
would do the following:
r
VCR Viewing Channel
When using the ANT. IN and RF OUT
jacks to connect your VCR, tune your
TV to channel 3 or 4.
When using the AUDIO/VIDEO jacks
to connect your VCR, tune your TV
to the TV's video input.
5