Download
Share
Print this page
Porter-Cable DA250B Instruction Manual
  1. Manuals
  2. Brands
  3. Porter-Cable Manuals
  4. Nail Gun
  5. DA250B
  6. Instruction manual

Porter-Cable DA250B Instruction Manual

Finish nailer
Hide thumbs Also See for DA250B:

Advertisement

Quick Links

Download this manual
FINISH NAILER
MODEL DA250B
IMPORTANT
Please make certain that the person who is
to use this equipment
carefully reads and
understands
these
instructions
before
starting operations.
The Model and Serial No. plate is located on the main
housing
of the tool.
Record
these numbers
in the
spaces below and retain for future reference.
Model No.
Type
Serial No.
Part No. 903898 - 04-01-04

Advertisement

loading
Need help?

Need help?

Do you have a question about the DA250B and is the answer not in the manual?

Questions and answers

Related Manuals for Porter-Cable DA250B

Summary of Contents for Porter-Cable DA250B

  • Page 1 FINISH NAILER MODEL DA250B IMPORTANT Please make certain that the person who is to use this equipment carefully reads and understands these instructions before starting operations. The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the...
  • Page 2 PORTER*CABLE Porter-Cable Corporation 4825 Highway 45 North Jackson, TN 38305 GB ENGLISH EC-DECLARATION CONFORMITY We declare under our sole responsibility that this product is in conformity with the regulations EN292-2: section 3 of 1992 EN292-1: section 5 of 1992 EN1050:1993...

  • Page 3: Read And Follow All Instructions

    When using pneumatic tools, basic safety precautions should always be followed to reduce the risk of personal injury. For additional information visit our website www.porter-cable.com. Additional Information regarding the safe and proper operation of air nailer and fastener tools (i.e.
  • Page 4 1. Read and understand tool labels and Fig. 1 manual. Failure to follow warnings could result in DEATH or SERIOUS INJURY. Fig. 1. 2. Operator and others in work area MUST Fig. 2 wear safety glasses with side shields. These safety glasses must conform to ANSI Z87.1 requirements (approved glasses...
  • Page 5 Porter-Cable Service Center for a replacement. Fig. 9. 16. Only parts, fasteners accessories approved by Porter-Cable. 17. Connect tool to air supply before loading fasteners, to prevent a fastener from being fired during connection. The tool Fig.

  • Page 6: Technical Specifications

    21. Remove finger from trigger when not Fig. 14 driving fasteners. Never carry tool with finger on trigger. In "Contact Actuation Mode" tool will fire a fastener if safety is bumped while trigger is depressed. Fig. 14. 22. Do not overreach. Keep proper footing balance at all times...

  • Page 7: Preparing The Tool

    If an in-line oiler is not available: place five or six drops of Porter-Cable Air Tool Oil into the tool's air inlet at the beginning of each workday.
  • Page 8 3. Observe fastener icon (A) Fig. 19A. Insert fasteners (B) Fig. 19A with points down (C) Fig. 19A. Slide fasteners forward to the front of the magazine. The magazine will hold two full strips of fasteners. IMPORTANT" Fasteners must point in the same direction as they will be driven.
  • Page 9 [o] _ _ :_;t/l_[_ I]_[._o..]ijd[o]_[.."] USING THE TOOL WITH DIFFERENT TRIGGERING OPTIONS Complete all steps of PREPARING THE TOOL before using the tool. This tool is shipped from the factory with a "single sequential actuation" trigger which will limit the tool to firing method number 1 only. A "contact actuation"...
  • Page 10 Fig. 25 Fig. 26 A rubber nose cushion (A) Fig. 25, is provided to reduce marring of the work surface. The rubber cushion can be removed to provide increased depth-of- drive for toe-nailing applications. When not in use, a storage location provided for the the rubber cushion on the magazine (A) Fig.

  • Page 11: Clean And Inspect

    If tool is used without an in-line oiler: place 5 or 6 drops of Porter-Cable Air Tool Oil into the air inlet of the tool at the beginning of each workday. SERVICE REPAIRS...
  • Page 12 Porter-Cable • Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable.com for a catalog or for the name of your nearest supplier. _Since accessories, other than those offered by Porter- Cable •...
  • Page 13 Porter-Cable * Delta products should be obtained by contacting any Porter-Cable * Delta Distributor, Authorized Service Center, or Porter-Cable * Delta Factory Service Center. if you do not have access to any of these, call 888-848-5175 and you will be directed to the nearest Porter-Cable * Delta Factory Service Center.