Getting Started; First-Tm_E Operation - GE 09GP110 Manual

Getti'ng Started
First-Time Operation
The steps below will help you get your TV connected and working quickly.
Page numbers are also listed for more details.
1.
Unpack TV and accessories.
Shown below are the accessories that
came packed with your TV.
6
DipoleAntenna
AC PowerCord
Remote Controland
Two Batteries
(Under Counter Mounting Hardware)
I =l"
One Mounting Bracket /t_';
(Two Pieces)
One Mounting Gukle(TemOate)
Five Washers
Five Hex Nuts
FifteenSpacers:
Fifteen Phillips Screws: FNe 1" Spacers
Fwe 1"Screws Five 1/2" Space_
Rye 2"Screws Rve 1/4" Spacers
Rye 3" Screws
Two Power Cord Hooks
2. Place batteries in remote.
1. Turn the remote control face down.
2. Remove the battery cover.
3. Place two "AAA" batteries as shown
matching the + and- end of each
battery in the compartment.
4. Replace the cover.
3. Connect antenna or
cable-TV system.
Most antenna or cable-TV systems can
be connected as shown here.
Incoming Cable from Antenna or
Cable-W System
Ba_of
"IV
• Details for connecting a home antenna
to your'IV axe onpage 14.
• Details for connecting a cable-TV
system to your TV are on page 15.
4.
Attach power cord.
First attach the flat end of the power cord
completely into the connector on the back
of your TV, and then plug the otherend
into a wall outlet.
Do This Not This
2