Mitsubishi Electric 3D DLP 742 series Owner's Manual page 35

2. TV Menus 35
Lock, continued
Using TV Locks
After you set the Bock,you must use your pass code to:
View a Bocked program
View a Bocked channeB
View the Bocked TV
CanceB the Bock
Open the Lock menus
When entering the Lock menu, you will be prompted to
enter a pass code.
To change the pass code, press 9 and LASTat the
same time. Either enter a new pass code to open
the Lock menu and make changes or press EXITto
cBose the menu.
Rfany of the Bocksare turned on and you exit the
menus when prompted for a new code, the oBd code
and aH Bock settings will be retained.
RfaH Bocks are turned off and you exit the menus
when prompted for a new code, then the previous
code will be erased.
Bypassing TV Locks
Rf y ou try to watch a bBocked program or channeB
or the TV is Bocked by time, a notice will appear
prompting you for a pass code. To use the TV, input
your four=digit pass code and press ENTER.
If a program is blocked, you can still use the TV
without entering a pass code. Change to a channel
airing an allowed program or change to another
device.
If you forget your pass code, you can view the
locked TV without entering your pass code. When
prompted for the pass code, press 9 and LASTkeys
on the TV remote control at the same time. This
process temporarily unlocks the TV.
For assistance ca((1(800) 332-2119