Troubleshooting - NordicTrack Commercial 1750 User Manual
Ntl140104
Hide thumbs
Also See for Commercial 1750:
- User manual ,
- Owner's manual (30 pages) ,
- User manual (40 pages)
Table of Contents
Advertisement
TROUBLESHOOTING
Most treadmill
problems
can be solved by following
the simple steps below. Find the symptom
that
applies, and follow the steps listed, if further assis-
tance is needed, see the front cover of this manual.
SYMPTOM: The power does not turn on
a.
Make sure that the power cord is plugged into a
surge suppressor, and that the surge suppressor is
plugged into a properly grounded outlet (see page
14). Use only a single-outlet surge suppressor that
meets all of the specifications described on page
14. iMPORTANT: The treadmill
is not compati-
ble with GFCl-equipped
outlets and may not be
compatible
with AFCl-equipped
outlets.
b. After the power cord has been plugged in, make
sure that the key is inserted into the console.
C.
Check the power switch located on the treadmill
frame near the power cord. If the switch protrudes
as shown, the switch has tripped. To reset the
power switch, wait for five minutes and then press
the switch back in.
Tripped
Reset
SYMPTOM: The power turns off during use
a.
Check the power switch (see the drawing above). If
the switch has tripped, wait for five minutes and
then press the switch back in.
b.
Make sure that the power cord is plugged in. If the
power cord is plugged in, unplug it, wait for five
minutes, and then plug it back in.
c.
Remove the key from the console, and then
reinsert it.
d.
If the treadmill still will not run, please see the front
cover of this manual.
SYMPTOM: The console
displays remain lit when
you remove the key from the console
a.
The console features a display demo mode, de-
signed to be used if the treadmill is displayed in a
store. If the screen shows a preset presentation
when you remove the key, the demo mode is
turned on. To turn off the demo mode, hold down
the Stop button for a few seconds. If the demo
mode is still on, see step 5 on page 25 to turn off
the demo mode.
SYMPTOM: The displays
of the console do not
function
properly
a.
Remove the key from the console and UNPLUG
THE POWER CORD. Place the treadmill in the
storage position (see HOW TO FOLD THE
TREADMILL on page 29).
Next, remove the two indicated #8 x 3/4" Screws
(1).
a
30
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Commercial 1750 and is the answer not in the manual?
Questions and answers
Having major issues with My Nordictrack commercial 1750 first showing a blue screen only and now not powering on at all. Trying to troubleshoot using the manual and online resources but the unit’s power switch only toggles from off or reset not off on and there is no reset button.
If the NordicTrack Commercial 1750 does not power on and shows a blue screen, follow these troubleshooting steps:
1. Verify Power Supply and Safety Key
- Ensure the treadmill is plugged into a working wall outlet.
- Test the outlet with another device to confirm it's functional.
- Insert the safety key properly.
2. Check the Circuit Breaker
- If the reset circuit breaker is tripped, flip it off and then turn it back on.
3. Examine the Power Switch
- Make sure the power switch is turned on.
4. Look for Error Codes
- If error codes appear, refer to the user manual for guidance on resolving them.
5. Fix White or Blue Screen Issues
- If the treadmill screen is stuck, it may need a reset or software update.
- Contact NordicTrack support for further assistance if the issue persists.
If these steps do not resolve the problem, consider reaching out to NordicTrack customer support.
This answer is automatically generated
What is amperage need
The amperage requirement for the NordicTrack Commercial 1750 is 15 amps.
This answer is automatically generated
My NTL14113C.2 doesn’t have touchscreen buttons for Wi-Fi or browser anymore. When I boot it up it goes by the Android screen too fast straight to iFit. How do I get to the Android screen so I can set up Wi-Fi and do a firmware update?