Frequently Asked Questions; Technical Faults - Miele Inspira G 2140 Operating Instructions Manual

Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service
call.
z_Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
co caus n m a g e........................................
_ssue
The Start/Stop indicator
does not flash after the
dishwasher is turned on
with _.C.
Possible fault
The machine is not
plugged in.
The fuse has tripped.
The dishwasher stops The fuse has tripped.
during a program.
The program cycle There may be a technical
fault.
The waterproof system
has activated.
indicators "Rinse",
"Drying" and "End"
flash at the same time.
The drain pump is
running when the door
is open.
Solution
Insert the plug.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
- Turn the dishwasher off
After a few seconds:
- Turn the dishwasher
on.
- Select the desired
program with the
program selector
button.
- Press the "Start/Stop"
button.
If the problem persists,
call Technical Service.
- Turn off the water
supply.
- Call Miele Technical
Service.
29