Table of Contents
Advertisement
(5) Make sure that the battery switch of the battery backup unit for replacement is set to
OFF.
(6) Insert the battery backup unit for replacement into the slot and fix it with two screws.
For the insertion, fit the drop protection claw to the notch on the chassis, slide the
unit to the left, and insert it slowly.
When inserting the battery backup unit into the array controller, push it
as far as it will go and then secure it with the screws.
Incorrect insertion may cause malfunction.
(7) Set the battery switch of the replaced battery backup unit to ON.
(8) Install the battery cover on the array controller.
(9) Install the front mask on the array controller and lock it with a key.
98
Advertisement
Table of Contents
