Download Print this page
Panasonic SX-NP10 Driver Manual
Hide thumbs Also See for SX-NP10:

Advertisement

Quick Links

Windows
2000 Professional
Windows
XP Professional
Windows
XP Home Edition
System Requirements
• Windows® 2000 Professional/XP Professional/XP
Home Edition operating system
• An available USB port
• Celeron
TM
400 MHz or faster CPU
• 128 MB minimum memory
• 40 MB minimum hard drive space for installation,
about 10 MB hard drive space per minute for audio
recording.
• 16 bits (65,536 colors) minimum color depth
DEVICE DRIVER
INSTALL MANUAL
*1
on the personal computer
• 800x600 minimum display resolution.
*1 Trouble-free connection to all USB port enabled
personal computers cannot be assured. Trouble-
free connection via a USB hub cannot be assured.
• Windows is a registered trademark of Microsoft Cor-
poration in the United States and/or other countries.
• Celeron is a trademark of Intel Corporation.
DIGITAL PIANO
NP10
SX
-

Advertisement

loading

Summary of Contents for Panasonic SX-NP10

  • Page 1  DIGITAL PIANO NP10 Windows  2000 Professional  Windows XP Professional Windows  XP Home Edition DEVICE DRIVER INSTALL MANUAL System Requirements • 800x600 minimum display resolution. • Windows® 2000 Professional/XP Professional/XP *1 Trouble-free connection to all USB port enabled Home Edition operating system •...
  • Page 2 Device Driver Installation When installing, log on to your computer using “Administrator” (Windows 2000) “Computer Manager” (Windows XP). •Before installation, do not connect the NP10 to your computer with a USB cable. 1.Download the “Device Driver Installer” from the web site.
  • Page 3 USB cable, first press the tasktray bar's “Disconnect” icon and then select [Safety remove Panasonic USB MIDI]. •If an application is using the Panasonic USB MIDI, it cannot be disconnected, so first exit the application before disconnecting the NP10.
  • Page 4 Device Driver Uninstallation Disconnect other USB devices in advance. •Turn the NP10 on and connect it to the computer with a USB cable. •When uninstalling, log on to the computer using “Administrator” (Windows 2000) “Computer Manager” (Windows XP). 1.Press the [Start] button, and open the [Control Panel]. •With Windows 2000, the [Control Panel] is contained under [Settings].