Contents Call from the phonebook Access the phonebook during a call Add a record 1 Important safety instructions Edit a record Delete a record 2 Your phone Delete all records What is in the box Overview of the phone 7 Call log Overview of the base station Display icons Call list type...
Page 4
Set the answering machine language Set the answer mode Announcements Incoming messages (ICM) Set the ring delay Remote access 12 Technical data 13 Notice Declaration of conformity Use GAP standard compliance Compliance with EMF Disposal of your old product and batteries 14 Frequently asked questions 15 Appendix...
1 Important safety • Do not open the handset, base station or charger as you could be exposed to high voltages. instructions • For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. • This equipment is not designed to make emergency calls when the power fails.
2 Your phone Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips Power adapter** offers, register your product at www.philips. com/welcome. What is in the box Line cord* Guarantee Base station (CD190) Quick start guide...
Overview of the phone Mute or unmute the microphone. i Microphone Recall key (This function is network dependent.) Set the dial mode (pulse mode or temporary tone mode). • Scroll down on the menu. • Decrease the earpiece/speaker volume. • Access the call log.
CD195 Icon Descriptions When the handset is off the base station/charger, the bars indicate the battery level (from full to low). When the handset is on the base station/charger, the bars keep scrolling until charging is complete. The empty battery icon flashes and you hear an alert tone.
3 Get started Caution • Make sure that you have read the safety instructions in the 'Important safety instruction' section before you connect and install your handset. Connect the base station Warning Connect each end of the power adapter • Risk of product damage! Ensure that the power supply to (for multi handset version only): voltage corresponds to the voltage printed on the back...
Note • The country/language setting option is country dependent. If no welcome message is displayed, it means the country/language setting is preset for your country. Then you can set the date and time. To re-set the language, see the following steps. Select [MENU] >...
Press MENU/OK. Check the battery level Select [ANSW MACHINE] > [REMOTE ACC.] > [CHANGE PIN], then press MENU/OK to confirm. Enter the old PIN, then press MENU/OK to confirm. Enter the new PIN code, then press MENU/OK to confirm. Enter the new PIN code again, then press MENU/OK to confirm.
Check the signal strength The number of bars indicates the link status between the handset and base station. The more bars are shown, the better the connection is. • Make sure the handset is linked to the base station before you make or receive calls and carry out the phone functions and features.
4 Calls Press to dial out the call. Call from the redial list Note You can make a call from the redial list (see 'Redial a call' on page 19). • When the power fails, the phone cannot access emergency services. Call from the phonebook You can make a call from the phonebook list (see 'Call from the phonebook' on page 15).
Make a second call Warning • When the handset rings or when the handsfree is activated, keep the handset away from your ear to Note avoid ear damage. • This service is network dependent. Note Press R during a call. •...
Page 15
When you are connected to two calls, press R, then . » The two calls are combined and a conference call is established.
5 Text and numbers You can enter text and numbers for handset name, phonebook records, and other menu items. Enter text and numbers Press once or several times on the alphanumeric key to enter the selected character. Press REDIAL/C to delete the character. Press to move the cursor left and right.
6 Phonebook Enter the first character of a contact or press MENU/OK > Press [PHONEBOOK] > [VIEW] to access the This phone has a phonebook that stores up to phonebook list. 50 records. You can access the phonebook from Press the alphanumerical key that matches the handset.
Enter the number, then press MENU/OK » The handset displays a confirmation to confirm request. » Your new record is saved. Press MENU/OK to confirm. » The record is deleted. • Press and hold # to insert a pause. Delete all records Note Press MENU/OK.
7 Call log Select an option, then press MENU/OK to confirm. The call log stores the call history of all missed View the call records or received calls. The incoming call history includes the name and number of the caller, Press .
Select a record, then press MENU/OK to confirm. Select [DELETE], then press MENU/OK to confirm » The handset displays a confirmation requests. Press MENU/OK to confirm. » The record is deleted. Delete all call records Press . » The incoming call log is displayed. Press MENU/OK to enter the options menu.
8 Redial list Select a record, then press MENU/OK to confirm. Select [DELETE], then press MENU/OK to confirm. The redial list stores the call history of dialed » The handset displays a confirmation calls. It includes the names and/or numbers you request.
9 Phone settings Set the docking tone Docking tone is the sound made when you place the handset on the base station or You can customize the settings to make it your charger. own phone. Press MENU/OK. Select [PHONE SETUP] > [SOUNDS] > [DOCKING TONE], then press MENU/ Sound settings OK to confirm.
Page 23
Press MENU/OK. Select [PHONE SETUP] > [LANGUAGE], then press MENU/OK to confirm. Select a language, then press MENU/OK to confirm. » The setting is saved.
10 Services Press MENU/OK. Select [SERVICES] > [NETWORK TYPE], then press MENU/OK. Select a network type, then press MENU/ The phone supports a number of features that help you handle and manage the calls. » The setting is saved. Call list type Select the recall duration You can set whether you can view all incoming Make sure that the recall time is set correctly...
Select a dial mode, then press MENU/OK Note to confirm. • » The setting is saved. For models with an answering machine, you hear a confirmation beep. Note » Registration is complete in less than 2 minutes. The base automatically assigns •...
Restore default settings You can reset your phone settings to the original factory settings. Press MENU/OK. Select [SERVICES] > [RESET], then press MENU/OK to confirm. » The handset displays a confirmation request. Press MENU/OK to confirm. » All settings are reset.
11 Telephone Select [ANSWER ONLY]/[RECORD ALSO]/[OFF], then press MENU/OK to answering confirm. » The setting is saved. machine Set the answering machine language Note • Available only for CD195. Note • This feature only applies to models with multiple- Your phone includes a telephone answering language support.
Listen to the announcement Announcements Press MENU/OK. The announcement is the message your caller Select [ANSW MACHINE] > hears when the answering machine picks up [ANNOUNCEMENT], then press MENU/ the call. The answering machine has 2 pre- OK to confirm. recorded announcements: [RECORD ALSO] Select [ANSWER ONLY] or [RECORD and [ANSWER ONLY].
Set the ring delay Note • If you pick up the phone when the caller leaves a message, the recording stops and you can talk to the You can set the number of times the phone caller directly. rings before the answering machine picks up the call.
Press MENU/OK. Note Select [ANSW MACHINE] > [REMOTE • When there is no message, the phone hangs up ACC.], then press MENU/OK to confirm. automatically if no key is pressed for 8 seconds. Select [ON]/[OFF], then press MENU/OK to confirm. Remote access commands »...
13 Notice general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures Declaration of conformity for our products, to comply with all applicable legal requirements and to stay well within...
Page 33
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.
14 Frequently correctly on the charger, you can hear a docking tone. asked questions • The charging contacts are dirty. Disconnect the power supply first and clean the contacts with a damp cloth. • Batteries are defective. Purchase new ones No signal bar is displayed on the screen.
15 Appendix X Ψ Ω 9 Characters (for Polish) space 0 Text and number input tables A B C 2 D E F 3 Characters (for English/Latin) G H I 4 space 0 Ø J K L Ł 5 M N O 6 A B C 2 P Q R S 7 D E F 3...