JVC AV-27050 User Manual page 28

BUTTON FUNCTIONS
NOTES:
Picture in Picture is
available On the
following models
only.:
, AV-36050
'AV-27050
ON/MOVE
(Picture in Picture)
PiP a/lows you to view two pictures
simultaneously
(PIP) ON/MOVE
02
i;i i i
EXIT to turn PIP off
Note: The PIP channel and main
screen channel will appear in the
display momentarily right after you turn
on PIP. You can leave them up
permanently by pressing DISPLAYuntil
you reach the mode.
Note: The PIP Screen is 1/9of the
regular screen size.
Once PIP is turned on, the ON/MOVE
button operates the Move feature.
You can move the PiP window to any of
the TV's four corners.
ON/MOVE
Note: Each press of the On/MovE
button will shift the PIP window one
position.
Note: When the PIP screen has no
signal, the PIP window will be blue.
FREEZE
You can freeze the picture in the main
screen into the PIP window
FREEZE
Note: When the PIP is off, pressing
FREEZEtakes a snapshot of the main
screen and puts it into the PIP
window.., great for catching those mail
order addresses.
Note: When the PIP is on FREEZEstops
the PIP picture.
SWAP
You can swap the PIP picture and the
main picture.
SWAP
CHANNEL -I+ For PIP
Change the channel in the PiP window.
CH -/+
SOURCE
You can select the source for the PiP
window.
SOURCE
TV_V-I_V-21
/ / /
\ \
PIP NOTES
50 Series models have 2 Tuner PIP and can see
two signals at once. This means you can view two
channels at the same time.
In order for PIP to work. the TV must be set to "TV
mode".
If you use your VCR to play a video, the VCR will
automatically switch your input to VCR mode. In
VCR mode. the TV sees only one signal, that of
the VCR. In order to view PIP, you then need to
press the TV/VCR button on your VCR remote to
switch back to TV mode.