Using The Real Time Tape Counter; Using Zero Return - JVC TV-13140 User Manual

I%1
USING THE REAL TIME TAPE COUNTER USING ZERO RETURN
The Co-Screen Real "rimeTape Counter shows the tape running t_ne in Hours, Minutes and Seconds.
You can easily determine how long the tape has been running or how much time is le0 on the tape.
TO VIEW THE COUNTER DISPLAY
B ress the CALL butthnto display the Real T_me
Tape Counter.
CALL
%
RESET
COUNTER --_
The zero reture function provides a convenient method of rapidly returning to the starting point of recording or
playback. The starting point can be indexed for any location on the tape by pressing the COUNTER RESET button
and COUNTER ZERO RETURN button.
B Press the CALL button to display the counter.
CALL
%
___ Before playback or recording, press the
COUNTER RESET button to set the counter
to "00:00:00".
RESET
COUNTER --_
Begin Playback or Recording to start the tape,
the counter will display the elapsed time.
%or%÷%
1B
_J hen you wish to make the countar disap*
pear, press the CALL burton once again.
CALL
%
NOTE: • If you rewind the tape from "00:00:00", a minus sign (=-") will be displayed in front of the time.
• When you load a tape, the counter will reset to "00:00:00 _.
• The counter does not function on nonrecorded (blank) sections of the tape. When you rewind,
fast forward or play tapes through blank sections, the counter stops.
40
Begin playback or recordiog.
Press the STOP button.
%
_,g_ll Press the ZERO RETURN • button. The tape will rewind
and automatically stop at
the "00:00:00" position.
ZERO
COUNTER
_u
41