Table of Contents
Advertisement
This feature provides a method of indexing the starting
point. And you can easily search the index mark in either
fast forward or rewind direction.
NOTES:
• The index mark will be made automatically When the
REC button is pressed. It will also be marked at the
starting point of Timer recording and OTR.
• The index mark is not recorded if the PAUSE/STILL
button is pressed and released during recording.
• The time gap between making the index marks on the
tape should be greater than 1minute for SP recording,
2 minutes for LP recording and 3 minutes for SLP
recording.
• Index marks cannot be made if the erase-protection
tab on the cassette has been removed.
• Index search can be set up to 20.
• This function is not operative in recording mode.
• Counter Memory function is not operative in this
mode.
• You must use the remote control for this procedure.
Make sure ...
• Power must be turned on.
• Insert a tape.
In the example below: You are watching fourth pro-
gram (progrm number 4) and want to fast forward to
seventh program (program number 7). You must skip
three programs.
CURRENT
PLAYBACK
PROGRAM
Beginningof tape
!
End of tape
I Pro.11
Pro.21P,o.3 Pro. [Pro.6
[Pro.7
I
• r4
3
2
1
1
2
3
INDEX MARK
1
Select
"INDEX
SEARCH"
mode
Press MENU button repeatedly
to point to "INDEX SEARCH".
Then, press SELECT button.
,,,,,
,
,,,,
IIP
-MENU-
TtMER
PROGRAMMING
PICTURE
CONTROL
SETTING
CLOCK
CNANNEL
SET
UP
USER'S
SET
UP
LANGUAGE
ENGUSHI
CAPTION
IC_PTION1]
TIME SEARCH
INDEX
SEARCH
2
want to skip
PressCH • or • button repeat- (,N=_XSE_.
edly until your desired number of
I-S°_ _"
program that you want to skip is
L
appeared.
(Example:
To skip
three programs)
Enter your desired number of program that you
3
Begin Index Search
Press
REW
or EFWD
button.
The TV/VCR
begins rewinding
or fast forwarding
then goes into
the Play mode at the beginning
of desired program.
NOTE: Every time an index signal is skipped, the num-
ber in the program indicator decreases by one.
4 After Index Search
When the preset program is reached, normal playback
will start.
TO CANCEL
THE INDEX SEARCH
• While setting: Press MENU button.
• While the Index
Search
is in progress:
Press
STOP/EJECT button on the TV/VCR or the remote
control. This will end the Index Search.
- 24 -
EN
6F18
Advertisement
Table of Contents
