3. CONTROL
PANEL
/
Automatic
Dehumidifier
Off
Max
Humidistat
light
Fan Switch
Speed
High
Low
,J
Pictured control panel is similar to your panel. FAN SWITCH:
Some dehumidifiers
feature a two-speed fan. Use the
high speed to maintain maximum water removal. The lower speed can be used when quieter operation is desired.
Special
Design
Prevents
Freeze-up
This design
will
allow
your
dehumidifier
to oper-
ate as low as 65°F and 50% relative
humidity
without
freeze-up.
It features
a specially
designed
dehumidifier
coil
with
copper
tubes
mechanically
bonded
to full collared
aluminum
fins. This com-
bination
provides
a superior
surface
area for dehu-
midification.
In general, dehumidification
is not usually needed
during conditions
of low room temperature (below
65°F) or low relative humidity. Continued opera-
tion under these conditions
may cause frost forma-
tion on the dehumidifying
coil thus blocking the
air circulation.
To save electricity
and prevent pos-
sible damage to the unit, it is best to turn the unit
OFF.
Automatic
Humidity
Control
(on most models)
The humidistat
control
automatically
turns
your
dehumidifier
on or off to maintain
the humidity
level
you select.
Allow
dehumidifier
to reach
room
temperature,
then
turn control
knob
to num-
ber 5 (normal
average
setting).
If unit does not
turn on at this setting,
this generally
means that
the relative
humidity
is already
low and dehumidi-
fication
may not be needed
at this time.
After operating several clays at this setting with
doors and windows closed, you may readjust this
control to a slightly higher number for lower
humidity (drier air) or to a slightly lower number
for higher humidity (moist air).
Important:
This water is not suitable for drinking.
Overflow
Indicator
(on most models)
An automatic
overflow
switch
and indicator
light
are provided
on most models
to turn
the dehumid-
ifier off before
the container
overflows.
When
the
indicator
light on the control
panel
glows,
the
water
container
must be emptied.
Need help?
Do you have a question about the HB50 and is the answer not in the manual?
Questions and answers