Door Limits - Genie 2042 Installation Manual

I
20
The OPEN (UP) and CLOSE (DOWN) door positions
are controlled by making the adjustments on the
panel located on the bottom of the power head. The
adjustments that can be made are:
• Close Travel Limit,
• Open Travel Limit,
Adjust Closing Force
Adjust Opening Force
Transmitter Programming
ENGAGE CHAIN/BELT CONNECTOR
CARRIAGE
1. Press and hold the "Close Travel Limit" B button
until the chain or belt connector advances and
engages to the Carriage Assembly (Fig. 6-2).
B) CLOSE TRAVEL LIMIT
1. Press and hold the "Close Travel Limit" D button
until the door is fully closed.
2. You can quickly press and release the "Close
Travel Limit"[] button to move the door in small
increments. You can also use the "Open Travel
Limit" [] button to move the door slightly in the
UP direction.
3. Door is fully closed when the bottom edge of door
presses firmly onto the ground.
4. Once the door is in the desired position, press and
release the "Close SET Limit" [] button. The
LED indicator light will blink green once. This
stores the closed position in memory.
C) OPEN TRAVEL LIMIT
1. Press and hold the "Open Travel Limit" [] button
to move the door to its fully opened position. This
starts the opener moving in the UP direction.
2. Hold the "Open Travel Limit" [] button until the
door is in the fully opened position that you desire,
then release this button.
3. You can quickly press and release the "Open
Travel Limit" _ button to move the door in small
increments. You can also use the "Close Travel
Limit" [] button to move the door slightly in the
DOWN direction.
4. Once the door is in the desired position, press
and release the "Open SET Limit" [] button.
The LED indicator light will blink green twice.
This stores the opened position in memory.
PN# 37026500123
LED
Indicator Light
Open
Open Set Limit Up Force
\ _;,.(_,',} ..... Travel Limit Button, OPEN C°stt_Clen t
LEARN MANUAL LIMIT FORCE
\
Code CODE Close
CLOSE
Down Force
Button Close
Travel Limit Set Limit Control
Button Adjustment
/_1 ove.
Latch
Movement
Carriage Assembly
Carriage Assembly
05/15/2009