Campbell Hausfeld IRONFORCFe WL6500 series Operating Instructions Manual

Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observ ng all safety
information. Faiiure to comply with instructions could result in personal injury and/or property
damagel Retain instructions for future reference.
Oilless Air
IRONFORCF__ Compressors
Description
Oilless compressors are designed for
do-it-yourselfers with a variety of home
and automotive jobs. These
compressors power spray guns, impact
wrenches and other tools. These units
operate without oil.
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates
an Imminently
hazardous situation which, ff not
avoldee_ WILL resu/f In deafh or serious
Injury.
Wanllng Indicates
a potentially
hazardous situation whlo% if not
avolde_ COULD result In death or
s_Hous injury.
Carrion Indl¢'.ates a
potenffally
hazardous situation whk_ if nor
avolde_ MAY _lsuif ln mltmr or
moderate InJu_.
t NOTICE t _--._dlcate,
Important
Information, that If not followeeL MAY
cause damage tu equipment.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings, bolts, etc., before
putting unit into service. In case of
questions, damaged or missing parts,
please call 1-800-543_o400 for customer
@
O DO NOT RETURN THE
PRODUCT TO THE
RETAILERI
Information '_l_ -- _
Record the Model No, Serial NO. and
date of purchase located on the base
below the pump in the space below.
Model No.
Serial No.
Date of purchase
Retain these numbers for future
reference.
assistance or call the nearest Campbell
Hausfeld Authorized Service Center.
Breathable Air Warning
This compressor/pump is not
equipped and should not be used
"as is" to supply breathing quality
air. For any application of air for
human consumption, the air
compressor/pump will need to be
fitted with suitable in-line safety
and alarm equipment. This
additional equipment is necessarj
to properly filter and purify the air
to meet minimal specifications for
Grade D breathing as described in
Compressed Gas Association
Commodity Specification G 7.1 -
1966, OSHA 29 CFR 1910. 134,
and/or Canadian Standards
Associations (CSA).
DISCLAIMER OF WARRANTIES
In the event the compressor is used
for the purpose of breathing air
application and proper In-line
safety and alarm equipment Is not
simultaneously used, existing
warranties shall be voided, and
Campbell Hausfeld disdalms any
liability whatsoever for any loss,
personal injury or damage.
precautions must be observed at atl
A listing of service center locations is
enclosed, Have the serial number.
model number, and parts list (with
missing parts circled) before calling.
Do not operate
unit If damaged times:
during shipping, handling or use.
cause injury orproper;y damage, included with this
product carefully. Be
General Safety thoroughly familiar
Information
_th the controls and
the proper use of the equipment.
Since the air compressor and other 2. Follow all local elect deal and safety
components (material pump. spray cedes as well as in t_ US, National
guns, filters, lubricators, hoses, etc.) Electrical Codes (NEC) and O¢cupatio_ll
used, make up a high pressure Safety and Health Act (OSHA).
pumping system, the following safety
O 2003 Campbell Hausfeld,Scott Fetzer F_ i_lt_s,product & service Informa*tion IN61020OAV 9/03
vkit www.chpower_om