To Turn The Power On; To Switch The Device Into Standby Mode; To Switch Between Input Modes; To Turn The Av Mute On/Off - Sharp Display Manager Operation Manual

To Turn the Power ON

1
Click the "ON" button next to "Power" on the controller window.
This turns power ON to the device.

To Switch the Device into Standby Mode

1
Click the "STANDBY" button next to "Power" on the controller window.
This switches the device into standby mode.

To Switch between Input Modes

The input mode can be switched among "RGB1", "RGB2", "RGB3", "Video1", "Video2" and "Video3".
• For more information about available modes, see the Operation Manual for the device.
1
Click the button for the mode you wish to select from "INPUT" on the controller window.
This switches the input to the selected mode.

To Turn the AV Mute ON/OFF

The AV Mute function can be switched ON and OFF.
1
Click the "ON" or "OFF" button next to "AV Mute" on the controller window.

To Turn the Black Screen ON/OFF

The Black Screen function can be switched ON and OFF.
1
Click the "ON" or "OFF" button next to "Black Screen" on the controller window.

To Turn the Mute ON/OFF

The Mute function can be switched ON and OFF.
1
Click the "ON" or "OFF" button next to "Mute" on the controller window.
"AV Mute", "Black Screen" and "Mute"
AV Mute : Displaying the black screen and turning off the sound temporarily
Mute : Turning off the sound temporarily
Black Screen : Displaying the black screen temporarily
- If you operate AV Mute with the device which does not support AV Mute function, the device's Black Screen and Mute will
be operated simultaneously.
- If you operate Black Screen with the device which supports AV Mute, the device's AV Mute will be operated.
- If you operate Mute with the device which supports AV Mute, the device will do nothing.
* To determine if your device supports AV Mute or Mute, please refer to your device's operation manual.

To Operate Devices via a Browser

Devices can be controlled via the network using a Web browser.
• This function can be used only when devices that can be operated through a Web browser are selected.
• Devices cannot be controlled through Web browser on "All Devices" or a group basis.
• The browser specified in "Browser used for accessing to device" will be started (Browser used for accessing to
device
• The URL to be accessed by the browser is the device IP address.
1
Click the "Browser" button on the controller window.
The browser is started, and it accesses the IP address of the specified device.
page 21).
11