Program; Switching To Thumbnail Display Of Specific Date (Selecting Program); Playing Back Program - Hitachi DZMV200E Instruction Manual

Program

Switching to Thumbnail Display of Specific Date (Selecting Program)

Since the scenes recorded on this video camera/recorder are collected as "programs" for each recording
date, selecting a program will allow you to display only the scenes on a specific date.
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
The Disc Navigation menu screen will appear.
3
Use the joystick to
choose "Switch" on the
"Program" menu
screen, and then press
the button.

Playing Back Program

You can play back only the selected program.
1
Press the DISC NAVIGATION button and then
the MENU button.
The Disc Navigation menu screen will appear.
2
Use the joystick to
choose "Play" on the
"Program" menu
screen, and then press
the button.
4
Use the joystick to select
the program to be dis-
played, and then press
the button.
The Disc Navigation
screen will be restored,
and the thumbnails of
the selected program
will appear.
Note: If you press the
selection midway, the original screen (thumbnail
select screen) will be restored.
Note: The dates displayed on the program select
screen will be in the Date Mode used when the
first scenes of programs were recorded, and the
date displays D/M/Y, M/D/Y and Y/M/D may be
mixed.
3
Use the joystick to select
the program to be
played back, and then
press the button.
Playback will start from
the first scene of the se-
lected program.
button to stop program
71