Table of Contents
Advertisement
WARNING!
Leaving the electronic speed control system on when
not in use is dangerous. You could accidentally set
the system or cause it to go faster than you want. You
could lose control and have an accident. Always
leave the system OFF when you are not using it.
To Vary The Speed Setting
If a set speed needs to be adjusted slightly, lift up or hold
down the speed control lever briefly until the desired
speed is reached. A single tap on the lever up or down
will change the speed in 0.6 mph (1 km/h) increments.
When the lever is released, the newly set speed remains.
To increase the speed for passing, use the accelerator.
After the accelerator is released, the previously set speed
will resume automatically.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115
To Deactivate
A soft tap on the brake pedal, or normal brake pressure
while slowing the vehicle, will deactivate the speed
control without erasing the memory. Pushing the speed
control lever forward or turning the key in the ignition
switch to the OFF/LOCK position will turn off the speed
control and erase the memory.
3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Crossfire and is the answer not in the manual?
Questions and answers
I have a 2004 Chrysler Crossfire 2 Dr coupe and lost the only key , no one has the ability to duplicate . I need a key, what do I do?
You have several options to obtain a replacement key for a 2004 Chrysler Crossfire 2 Dr coupe:
1. Purchase New Key Fobs – You can buy two new Key Fobs from a supplier of your choice. Once you confirm they work, you can discard the old key if it's damaged.
2. Dealer Replacement – Chrysler dealerships offer replacement keys, but they are expensive, typically costing between $250 and $350.
3. Locksmith Services – A locksmith can create a new key by either:
- Making a key to fit the lock.
- Replacing or reprogramming the lock to match a new key.
- If in the Georgia area, a locksmith can either travel to your location (for an extra fee) or you can bring the lock to them for service.
4. Manual Key Option – The Crossfire has a manual key lock on the driver’s door, so you can also consider getting a Valet Key made for backup access.
Choose the option that best fits your budget and convenience.
This answer is automatically generated