Table of Contents
Advertisement
SETTINGS
Communication Setup
This allows you to perform and/or change the
communication settings. This setting is required to use
BD-LIVE functions and software updates that connect
to the Internet.
NOTE
•
Make sure that the LAN cable is connected to this player
(See page 21). This setting cannot be performed when a
LAN cable is not connected.
•
For manually performing the setting, the following
information of the connected router or modem is required.
Confirm the information prior to the setting.
−
IP address, netmask, gateway, DNS address
1
Press HOME to display the menu screen.
2
Press a/b to select "Settings", then press d or
ENTER.
3
Press a/b to select "Communication Setup",
then press d or ENTER.
4
Press d or ENTER to move to the menu to the
right.
5
Press a/b to select "Change", then press
ENTER.
Setting the info. of the Ethernet
[Current Setup]
IP Address
: Auto Setup
Netmask
: Auto Setup
Gateway
: Auto Setup
DNS
: Auto Setup
•
For initializing the current setting, select "Initialize",
then press ENTER.
Change
Initialize
6
For setting the IP address, press c/d to select
"Yes" or "No", then press ENTER.
Do you obtain the IP address
automatically?
Yes
IP Address
Netmask
Gateway
•
If selecting "Yes": The IP address is automatically
obtained.
•
If selecting "No": The IP address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 44.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
7
Select "Next", then press ENTER.
•
If selecting "Yes" in the step 6, go to the step 9.
8
Enter your DNS address.
Enter your DNS address.
Primary
Secondary
•
The primary and secondary DNS addresses are
entered using the screen for inputting characters. (See
page 44.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
9
Select "Next", then press ENTER.
10
For testing the connection to the Internet, after
confirming the settings, press a/b to select
"Test", then press ENTER.
•
"Test" is available only when setting to obtain the IP
address automatically. "Test" cannot be selected if the
IP address has not been obtained automatically.
Confirm the current setting.
IP Address
: xxx xxx xxx xxx
Netmask
: xxx xxx xxx xxx
Gateway
: xxx xxx xxx xxx
DNS Address
: xxx xxx xxx xxx
MAC Address
: xx xx xx xx xx xx
Complete
•
As a result of the test, if the Internet connection fails,
enter the setup values manually.
11
Press a/b to select "Complete", then press
ENTER.
No
Next
Next
xxx xxx xxx xxx
Test
43
Advertisement
Table of Contents
Troubleshooting
