Table of Contents
Advertisement
USING
AS A PUSH CART
IMPORTANT:
Leave the latch lock clevis pin in place at
all times while using the cart as a push cart. The clevis
pin is shown in figure 1 on page 4.
To convert the cart for push operation, remove the 4"
long clevis pin and hairpin cotter which secure the
tongue in the towing position. (See drawing on page
8.) Pivot the front tongue into the storage position
underneath the rear tongue and secure it using the
same clevis pin and hairpin cotter. (See figure 5 on
page 5.) Place the plastic cap over the exposed end
of the tongue.
For best handling, and to help prevent accidental
tipping, distribute the weight of the load evenly in the
cart.
Do not load more weight into the push cart than you
can handle and control comfortably.
To dump material from the push cart, lift up on the
handle and tilt the cart forward. Be sure that the latch
mechanism on the tongue is locked and secured with
the clevis pin to prevent accidental release of the
latch.
CUSTOMER
RESPONSIBILITIES
o
Read and follow the maintenance schedule and the procedures listed in the maintenance section.
Fill in dates as you
__.,_,_/
.... complete regular service.
__._';/
Service Dates
Check for loose fasteners
X
Check for worn or damaged parts
X
Check tire pressure
X
Lubricate
X
Clean
X
X
SCHEDULED
MAINTENANCE
•
Check for loose fasteners before each use.
•
Check for worn or damaged parts before each use.
•
Keep tires filled to recommended tire pressure printed
on the tire.
CAUTION:
DO NOT inflate tires beyond
the maximum recommended pressure
printed on side of tire.
•
At the beginning of each season, using a light
machine oil, lubricate the latch, the latch pivot bolt,
and the area of the axle where the draw bar tongue
pivots. See figure 13.
•
Grease or oil the wheel bearings periodically (at least
once each season). Use grease or 20 weight oil. See
figure 13.
STO RAG E
•
Clean thoroughly before storing.
•
Remove any rust from painted surfaces and coat with
touch up paint.
•
Store in a dry area.
OIL
GREASE
FIGURE
13
CART SPECIFICATIONS
Tires:
Axle:
Capacity:
Approx. 8 h. Wt.
14" x 4" Pneumatic
5/8" Dia. Steel
Up to 500 Lbs. Max.
55 Lbs.
Advertisement
Table of Contents
