Craftsman 320.22305 Operator's Manual page 10

[IY.] _/[I]][
WARNING: Do not use this tool for scaffolding or as a ladder. Make sure to
tighten all screws securely prior to use. Maximum capacity: 300 Ibs.
ASSEMBLING THE TABLETOP
SUPPORTS (Fig. 2)
Place the 2 Long Tabletop
Supports (A) and the 2 Short
Tabletop Supports (B) on a flat
work surface so they form
a rectangle.
Fig. 2
A
ASSEMBLING THE UPPER
LEGS (Fig. 3 and Fig. 4)
Connect the 4 Upper Legs
(C) to the four corners on the
Tabletop Supports by inserting
the 16 Screws (G) through the
Tabletop Supports and then
through the 4 clearance holes
on the top of each Upper Leg.
Then attach a Nut (H) to each
screw and finger- tighten only.
NOTICE: The upper Legs must
be attached to the inside of the
Tabletop Supports.
Fig .3
Fig .4
G
C
Page 10 22305 ManuaLRevised_12 0528