Page 1
Operator's Manual [RRFTSHRN 16 Gauge ¾ - 21/2 " Length FINISH NAILER Model No. 351.184310 CAUTION: Read and follow • Safety • Operation all Safety Rules and Operating Instructions before First Use • Maintenance of this Product. • Parts List •...
Page 2
FINISH NAILER trim work, door and window manufacturing, furniture making If this Craftsman air-drive tool fails due to a defect in material and cabinetry. or workmanship within one full year from the date of purchase, SPECIFICATIONS return it to the nearest Sears Service Center in the United Capacity ......
Page 3
• The air supply system must be able to provide air pressure ° Be sure all connections in air supply system are sealed to of 60 to 100 pounds per square inch at tool. prevent air loss. • The lubricator should be filled with a non-detergent air tool °...
Page 4
QUICK RELEASE NOSE Refer to Figure 5 (page 6). The tool is equipped with a quick release nose for clearing Refer to Figure 5 (page 6). jammed fasteners. LUBRICATION ° If a fastener jams in the tool, disconnect the air supply from the tool.
Page 5
SYMPTOM POSSIBLE CAUSE(S) CORRECTIVE ACTION Trigger cap leaks air 1. O-ring damaged 1. Check and replace damaged O-ring (Fig. 5, No. 47) 2. O-rings damaged 2. Check and replace damaged O-rings (Fig. 5, Nos. 36, 38, 39, 41, 42, 47 and two 45) Cap leaks air 1.
Page 6
Model 351.184310 Figure 5 - Replacement Parts Illustration...
Page 7
PART PART DESCRIPTION QTY. DESCRIPTION QTY. 6412.00 5-0.8 x 6mm Shoulder Screw 6446.00 7.8 x 1.9mm O-Ring 6413.00 Deflector 6447.00 Spring 6414.00 6448.00 Valve Stem Spacer 6415.00 6449.00 2.5 x 1.4mm O-Ring 6347.00 5-0.8 x 25mm Socket Head Bolt 6450.00 Trigger Cap STD852005 5mm Lockwasher*...
Page 8
La caracteristica de seguridad Siesta herramienta impulsada por aire Craftsman falla debido a incapacita la herramienta a menos que el disparo por contacto un defecto en el material o en la mano de obra dentro de un aho presione en contra de la pieza de trabajo.
Page 9
LINEA DE SUMINISTRO DE AIRE • El sistema de suministro de aire debe ser capaz de proveer una presi6n de aire de 60 a 100 PSI en la herramienta. Refierase a la Figura 1 (pagina • El lubricador debe Ilenarse con un aceite de herramientas •...
Page 10
Laherramienta viene e quipada con uninterruptor rotatorio que puede c ambiar elmodo d eoperaci6n dedisparo r_tpido a disparo Onico. Cuando serota elconjunto delinterruptor(Fig. 5,No. 4 8)para colocarlo enlaposici6n dedisparo L_nico, herramienta dispara s61o unsujetador. Para disparar elpr6xi- mo setienen q ue soltar elgatillo ( Fig. 5,No. 35)yeldis- parador decontacto (Fig.
Page 11
SINTOMA CAUSA(S) POSIBLE(S) MEDIDAS CORRECTIVAS La tapa del gatillo tiene 1. Anillo O daffado 1. Revise y cambie el anillo O daffado (Fig. 5, No. 47) fugas de aire 2. Anillo O daffados 2. Revise y cambie el anillo O daffados (Fig.
Page 12
In U.S.A. or Canada for in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME SM (1-800-469-4663) Para pedir servicio de reparacibn a domicilio - 1-800-676-5811 Au Canada pour tout le service - 1-877-LE-FOYER SM (1-877-533-6937) For the repair or replacement parts you need: Call 6 a.m.