GENERAL
SAFETY
RULES
WARNING:
Read all safety warnings
and instructions.
Failure to follow
the warnings
and instructions
may result in electric
shock, fire and/or
serious injury.
Save all warnings
and instructions
for future
reference.
READ AND SAVE THESE INSTRUCTIONS
_,
WARNING:
Do not modify and/or use this stand for any application
other
than that for which it was designed.
•
Know your stand.
Do not attempt
to assemble
or operate your roller stand
until you have read the safety instructions
in this section.
•
Always
set up the stand
on a hard, dry, flat stable
surface.
•
Do not load roller stand
with
more than
130 Ibs.
•
Do not apply an unbalanced
load, which could result in the roller stand
tipping
over.
•
Be sure that the roller stand's
leg assembly
is fully opened
before
using.
•
Do not permit
children
to use the roller stand
unsupervised.
It is not a toy.
•
Keep the roller stand
dry, clean, and free from oil and grease. Always
use a clean cloth when cleaning.
Never use brake fluids, gasoline,
petroleum
based products
or any strong solvent to clean the stand.
•
Do not overreach.
Keep proper footing and balance at all times. Do not
reach over or across machines
that are running.
•
Always
keep your work area clean,
uncluttered
and well lit. Do not work
or place the roller stand on floor that are slippery
from saw dust, oil, water
or
wax.
•
Never sit, stand or climb on this roller stand. It is not designed
or
constructed
to accommodate
this type of use. It could tip over, causing
serious injury.
Page 6
16488
ManuaLRevised_12
0604