Advertisement
ASSEMBLY
iNSTRUCTiONS
TOOLSYOU
WILL NEED FOR ASSEMBLY
(2)
7/16" Wrenches
(1)
1/2" Wrench
(1)
1/2" Socket Wrench
NOTE:
Right hand (RH) and left hand (LH) are
determined from the operator's position while seated on
the tractor.
FOR LAWN TRACTORS
ONLY. Skip to page 5 if
you have a garden tractor.
STEP 1"
(Figure 1)
Attach the two support brackets to the base bracket
assembly.
STEP 2:
(Figure 1)
Attach an adhesive pad to each support bracket.
ADHESIVE PAD (16)
l
SUPPORT BRACKET (7)
1/4" NYLOCK NUT (11)
\
1/4" × 3/4" HEX BOLT (12)
FIGURE 1
STEP 3:
(FIGURE
2)
Raise the tractor seat and remove the seat springs and
four bolts from the rear fender using a 1/2" socket.
STEP 4:
(FIGURE 2)
Attach the base bracket assembly and the seat springs
to the fender using the bolts and washers supplied with
the sun shade. Tighten the bolts using moderate force.
Overtightening
might damage the threaded holes in the
fender.
STEP 5:
(FIGURE 2)
Insert the plastic caps into the ends of the base bracket
tube.
5/16" x 1"
HEX BOLT (13)
5/16" × 1"
HEX BOLT
(13)
.js116" WASHER (0)
_d)]j
SPRING
PLASTIC
J
_-_"
CAP (15)
FIGURE 2
4
Call 1-866-576-8388
for missing parts or assembly help
DO NOT RETURN TO STORE
Advertisement
