Craftsman 152.241180 Owner's Manual page 7

7
5
8 13
1
I
16
17
5
6
11B
i0
9
12
1. WHEEL GUARD - Covers the grinding wheels and
protects against accidental contactl
2. WHEEL COVER - Covers the grinding wheels and
provides access for routine maintenance.
3. MOTOR HOUSING - Contains the electrical motor.
4. MOUNTING FEET - Helps to minimize vibration of
the grinder.
5. EYE SHIELD MOUNTS - Supports the eyeshields.
6. EYE SHIELDS - Protective Lexan see-thru shields
to prevent any loose debris from contacting the
operator.
7. FLEXIBLE WORK LIGHT - Provides assistance to
the operator for grinding operations.
8. SPARK ARRESTORS - Prevents hot sparks and
debris from contacting the operator.
9. TOOL REST ADJUSTABLE SUPPORTS - Lets the
operator position the tool rest closer to the wheel as
the wheel decreases in diameter due to wear.
10. TOOL RESTS - Used to support the workpiece that
is being ground. Adjustable to provide angled
surfaces.
11. A) 8" GRINDING WHEEL 60 GRIT - Used to
remove light material from workpiece.
11. B) 8" GRINDING WHEEL 36 GRIT- Used to
remove heavy material from workpiece.
12. ON / OFF SWITCH - Used to turn "ON" and turn
"OFF" the grinder.
13. WHEEL DRESSER - Used to clean and smooth
surface of the 8" Grinding Wheel.
14. MOUNTING PAD - Used to secure the grinder to a
workbench or suitable work surface.
15.
16.
17.
GRINDING WHEEL IDENTIFICATION LABEL -
Provides information on wheel size, grit and maxi-
mum rpm. Must be left on to distribute the load of
tightening the Lock Nuts.
FLANGES - Used to secure the grinding wheels to
the grinder and distribute the load of the Lock Nuts.
LOCK NUT - Used to secure the grinding wheels to
the grinder.
_7