Craftsman CTX 9000 Operator's Manual page 17

Adjusting Mower Cutting Height
The cutting height is adjustable between 1.0" and 4.0" (2,5
and 10,2 cm).
The cutting height adjustment switch (A, Figure 8) controls
the mower cutting height. This same switch also controls
the spout rotator motor when a snowthrower is installed.
The arrows on the switch correspond to the direction of
adjustment (UP arrow raises cutting height, RIGHT arrow
rotates the spout right, etc). When the adjustment indicator
has reached the end of its travel, release the switch; holding
the switch down will damage the motor.
Figure 8
Attaching a Trailer
The maximum horizontal drawbar force allowed 444 Newton.
The maximum vertical drawbar force is 222 Newton. This
equates to a 396 Ibs (180 kg) trailer on a 10 degree hill.
Secure the trailer with an appropriately sized clevis pin (A,
Figure 10) and clip (B).
®
'4"
10 °
(lm)
20' (6m)
Figure 10
Seat Adjustment
The seat can be adjusted forward and back. Move the lever
(A, Figure 9), position the seat as desired, and release the
lever to lock the seat into position.
Figure 9
17