Craftsman 486.24339 Owner's Manual page 6

Assemble thelatchstandplateandthe latchstand
bracket t o the bottomofthe polytrayusingfour
1/4"x 3/4"hexbolts,1/4"flat washers and1/4"
hexnuts.Tighten.Seefigure6.
LATCH
STAND PLATE
LATCH STAND
BRACKET
1/4" HEX NUq
FIGURE 6
Place the poly tray down onto the wheel support,
positioning it so that the latch stand bracket snaps
under the latch lock lever. Fasten the tray to the
wheel support using eight 5/16" x 3/4" truss head
bolts and 5/16" hex nuts as shown in figure 7.
Tighten.
5/16" x 3/4"
TRUSS HEAD
BOLT
5/16" HEX
NUT
LATCH LOCK
LEVER
FIGURE 7