Advertisement
Carrying the Clamping Table
With the Clamping Table folded end clamping table
o!osed, carefully !Ift the Olamplng Tabre by the yellow
support grip mounted to the tool storage rack. (See
Figure !3.)
To avoid
havlng
the shop stand
open while moving, make aura handles
are tightenedsecurely.
Figure
13
Figure 14
Tilting
Table
Top
I.
Standing in front of the Clamping Table, loosen one
top looking lever then the other,
2,
Pull the table top up to the desired angle. (See
Figure 15.)
3o Secure handles.
Figure 1B
Opening
the Clamping
Table
1. Oarefully move the folded Olamplng Table to the
desired location,
2.
Fats'the front of the Clamping Table and hold the
edge of the table top, Carefully reach down and pull
the front legs of the table toward you. (See Figure
_4,)
3,
When the legs are in the fully-opened position,
place them securely on the floor.
TiLT ADJUBTME;NT
LOOKING HANDLE
Clamping Table
V¢orklng Area ................................. 30" x 20-1/2"
Clamping Table Weight .......................... 42 lbs.
Maximum Weight Support ................. ,,,330 Ibs,
Working Height ............................ 30" to 40-3/4"
Advertisement
