25cc/1.5 cu.in. 2-cycle 17 inch cutting path / 0.080 in. line gasoline weedwacker (28 pages)
Summary of Contents for Craftsman 358.795791
Page 1
Instruction Manual I CRRFTgMRN°I 25cc/1.5 cu. in. 2-Cycle GASOLINE HEDGE TRIMMER Model No. 358.795791 - 19" Blade • Safety • Assembly • Operation • Maintenance • Parts List • Espar_ol WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product.
Page 2
Parts and Ordering Back Cover FULL ONE YEAR WARRANTY ON CRAFTSMAN ® GAS POWERED HEDGE TRIMMER For one (1) year from the date of purchase, when this Craftsman Gas Powered Hedge Trimmer is maintained, lubricated, and tuned up according to the operat-...
Page 3
WARNING: Blades can throw objects violently. • You can be blinded or injured. • Wear safety glasses. Safety Boots Glasses WARNING: Hazard zone for thrown objects • Blades can throw objects violently. • Others can be blinded or injured. • Keep people and animals 30 feet (10 m) away.
Page 4
Sears Service Center. tee the avoidance of these problems. • Use only recommended Craftsman Users who operate power tools on a cutting blades and replacement continual and regular basis must moni- parts; use of any other parts may...
Page 5
30 days quality synthetic 2-cycle air-cooled or longer. Drain the gas tank, start the engine oil. We recommend Craftsman engine and let it run until the fuel lines brand synthetic oil. Mix gasoline and oil and carburetor are empty.
Page 6
1= Move the ON/OFF switch to the ON OPERATING INSTRUCTIONS position. It is recommended that the engine 2= Engage the throttle lock as follows: not be operated for longer than 30 seconds at full throttle. Releasing • press the throttle lock-out; •...
Page 7
choke l ever totheOFF C HOKE posi- 6. Allow the engine to run 10 seconds, tion. Allow the unit t orun for30more then move choke lever to the OFF seconds atthe OFF C HOKE position CHOKE position. before squeezing and releasing 7.
Page 8
• After each use, clean the unit and la- As the unit is used, carbon deposits bels using a damp cloth with a mild build up on the muffler and spark ar- detergent. resting screen. For normal homeowner • Wipe off unit with a clean dry cloth. use, however, the muffler and spark ar- CLEAN AIR FILTER...
Have damaged parts repaired or re- found on stabilizer container. Run engine placed by your Sears Service Center. at least 5 minutes after adding stabilizer. • Lightly oil external metal surfaces, Craftsman 40:1,2-cycle engine oil (air cluding the blade. cooled) is already blended with fuel To oil the blade: stabilizer.
ENGINE • Check entire unit for loose screws, • Remove spark plug and pour 1 tea- nuts, and bolts. Replace any dam- spoon of 40:1,2-cycle engine oil (air aged, broken, or worn parts. cooled) through the spark plug open- • At the beginning of the next season, ing.
Page 11
YOUR WARRANTY RIGHTS completed in a reasonable amount of OBLIGATIONS: The U.S. Environmen- time, not to exceed 30 days. If you tal Protection Agency/California Air Re- have any questions regarding your sources Board and Sears, Roebuck warranty rights and responsibilities, and Co., U.S.A., are pleased to ex- you should contact your nearest autho-...
call Sears at 1-800-469-4663. WHERE the owner if the part is under warranty. TO GET WARRANTY SERVICE: War- EMISSION CONTROL WARRANTY ranty services or repairs shall be pro- PARTS LIST: Carburetor, Ignition Sys- vided at all Sears Service Centers. Call tem: Spark Plug (covered up to mainte- 1-800-469-4663.