Table of Contents
Advertisement
KNOW
YOUR TRIM SAW
See Figure 1.
The safe use of this product requires an understanding
of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempt-
ing. Before use of this product, familiarize yourself with all
operating features and safety rules.
BEVEL CUT
Angles the trim saw to cut an angle from 0 ° to 45 °.
BLADE
WRENCH
STORAGE
Convenient wrench storage for quick blade changes.
DEPTH
CUT
Adjusts the depth of cut from 0 in. to 1-9/16 in.
LOCK=OFF
BUTTON
Your saw is equipped with a lock-off button which reduces
the possibility of accidental starting. The lock-off button is
located on the handle above the switch trigger. You must
depress the lock-off button in order to pull the switch
trigger. The lock resets each time the trigger is released.
NOTE: You can depress the lock-off button from either the
left or right side.
SPINDLE
LOCK
Locks the saw blade to tighten or loosen the blade screw.
UNPACKING
_1_
This product has been shipped completely assembled.
[] Carefully remove the tool and accessories from the
box. Make sure that all items listed in the packing list
are included.
[] Inspect the tool carefully to make sure no breakage or
,_
damage occurred during shipping.
[] Do not discard the packing material until you have
carefully inspected and satisfactorily
operated the tool.
[] If any parts are damaged or missing, please call
1-800-932-3188
for assistance.
PACKING
LIST
Cordless Trim Saw
Blade
Rip Guide
Blade Wrench
Operator's Manual
WARNING:
If any parts are damaged or missing
do not operate this tool until the parts are replaced.
Failure to heed this warning could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool
or create accessories not recommended
for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
Hide quick links:
Advertisement
Table of Contents
