1
1
S
ETTING UP THE
Figure 1-4: Connecting the Jukebox as the Only Peripheral
NEXT
PREVIOUS
JUMP
CONTENTS
3. Connect a SCSI cable between one of the SCSI ports on the jukebox with a SCSI port on your host computer (see
"3" on
INDEX
4. Plug a terminator into the unused SCSI port on the jukebox.
Because this configuration makes the jukebox the last peripheral on the SCSI bus, the bus must be terminated on the
jukebox.
NOTE:
5. Go to
J
UKEBOX
Figure
1-1).
The jukebox ships with a self-configuring single-ended / low-voltage differential terminator.
"Connecting Power, Adjusting IDs, and Turning the Jukebox On" on page
1-16.
12