Connecting The Scanner - Epson GT-7000 Photo User Manual

The scanner is the last device in the daisy chain
The scanner is in the middle of the daisy chain

Connecting the scanner

Connect the scanner to your computer or to another SCSI device
as follows:
Note:
The combination of 50-pin and 25-pin connectors you need varies
depending on the maker of your SCSI device and SCSI interface board.
1. Make sure the scanner, computer, and all other SCSI devices
are turned off and unplugged from the power source.
c
Caution:
Do not connect the scanner to the computer or other devices
while they are turned on as damage may occur.
1-16
Setting Up the Scanner
(other SCSI device)
terminator off
terminator on
(other SCSI device)