Various Functions While Using The Unit; Automatic Screen Adjustment; Freezing Animated Images; Turning Off The Image And Muting The Sound Temporarily - Sharp PG-M10SE Operation Manual

Various functions while using the unit

The following operations can be performed by opening the FLIP COVER of the remote control.

Automatic Screen Adjustment

Press the AUTO SYNC button.
The position and size of the input image will be
adjusted automatically in accordance with the
resolution.
• Operation is the same as with the AUTO SYNC button of the main
unit.
• When the optimum image cannot be achieved with Auto Sync
adjustment, use manual adjustments.

Freezing animated images

You can capture the desired frame of a moving picture.
Press the FREEZE button.
A still image of the current frame is displayed. To
restore the present picture, press the button again.
Tip
The still picture can also be enlarged (see page 23).
Turning off the image and muting the
sound temporarily
Press the AV MUTE button.
The image turns off and the sound is muted at the
same time. To restore the picture and sound, press
the button again.
22
FREEZE button
AUTOSYNC FREEZE
AUTO SYNC button
ENLARGE
ENLARGE +/– button
AUTO SYNC
FREEZE
AV MUTE
AV MUTE
AV MUTE button
KEYSTONE VOLUME
VOLUME +/– button
KEYSTONE +/– button

Adjusting the Volume

Adjusting the volume of the unit's speaker.
Press the VOLUME + button to increase the
volume or – to decrease.

KEYSTONE Adjustment

When distortion of the projected image
cannot be compensated with the adjusters,
press the KEYSTONE +/– button to adjust
accurately.
Using the KEYSTONE button to adjust the top
and bottom of a projected image.
The top and bottom of the projected will be
compensated, as shown in the diagram. If the menu
is displayed, distortion of the menu itself will not be
compensated.
When keystone adjustment is used, you may select to
enlarge the image to compensate for the adjustment or
leave the image size unaltered. (see page 32).
VOLUME
KEYSTONE