Interrupting A Copy Job - Sharp Multi Access Operation Manual

Hide thumbs Also See for Multi Access:

Table of Contents

Multi-Access Operation

Procedures for Using Multi-Access

1) Interrupting a copy job

Press the INTERRUPT key during a copy job.

Copying stops temporarily and the job can be interrupted. For details, refer to the

manual for copy mode.

2) Changing to a different print job during a copy job or auto print job

The procedure for changing to a print job during a copying job is explained here.

Press the JOB STATUS key. (

Select "FAX/PRINT OUTPUT" or "JOB OUTPUT" with the

keys and then press the OK key. (

Select a job whose status is "WAITING" with the

then press the OK key.

Select "YES" with the

The current job temporarily stops and the selected job is printed.

Press the START key to recommence copying.

The interrupted job recommences.

Notes

You can change to fax print job or a print job during copying.

You can change to a fax print job during a print job, or change to a print job during a fax

print job.

You cannot change to another job after interrupting the current job if the current job is a

two-sided copy job, two-sided print job, or 2in1/4in1 copy job.

page 5)

page 6)

keys and then press the OK key.

keys, and

Table of Contents