Sharp 14AG2-DC Operation Manual page 3

Red
Black
2
Do place the TV set onto an even stand, table or track which size is bigger than the
TV set. If the TV set is put onto a smaller size or uneven stand, table or track may
cause the TV cabinet to distort.
Do not put or insert anything between TV set and the stand, table or track.
To prevent fire, never place any type of candle or naked flames on the top or near
the TV set.
Wall or shelf mounting should follow the manufacturer's instructions, and should use
a mounting kit approved by the manufacturer.
To prevent electrical shock, do not subject the AC power cord to damage by bending
or twisting it, or by placing heavy items on top of it and do not place the AC and DC
power cord under the TV set. If the AC and DC power cord becomes damaged,
unplug it from the wall outlet immediately and call your dealer for service.
To prevent fire or shock hazard, do not expose this products to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the products.
Attention–connection of DC cord and battery terminals.
±: Connect the red battery clip to (+) on the battery terminal.
—: Connect the black battery clip to (–) on the battery terminal.
DC power can only be used for a 12V battery.
Do not use any battery besides a 12V.
Do not place the rod antenna near the battery.
Never mount the television in a car as it may become hot from receiving direct
sunlight and malfunction from vibration of engine or poor road condition.