Epson PowerLite 765c Parts Manual page 13

Configuring the Network Settings for Windows
Before connecting to the projector wirelessly, make sure your
computer is configured correctly. Also, make sure that the
Internet Connection Firewall is disabled. (See your Windows
online help system for details.)
Note:
Depending on your computer's wireless network adapter card,
the dialog boxes you see may be different than those shown in
this section.
1. Access your wireless network Properties window. For
example, in Windows XP click
Network and Internet Connections
the
Network Connections
this:
2. Right-click the
Wireless Network Connection
select . You see a screen like this:
Properties
Start > Control Panel >
. Then double-click
icon. You see a screen similar to
Right-click and
select Properties
icon and
Click here
Epson PowerLite 755c/765c Projector
3. Click the
Configure
on the screen that appears. You see a screen like this:
4. Ad hoc mode: Highlight
and set the Value to
Access point mode: Highlight
Value to
Infrastructure
5. Ad hoc mode: Highlight
the name you gave the projector's ESSID (for example,
).
CONF ROOM
Access point mode: Highlight
match the name assigned to the access point.
Note:
The SSID is case-sensitive.
6. Highlight
Encryption
7. Click the
General
wireless network device is enabled.
8. Ad hoc mode: Click
properties dialog box. Then go to "Projecting Wirelessly" on
page 15.
8/05 Epson PowerLite 755c/765c Projector
button. Then click the
Advanced
in the Property list
Network Type
.
802.11 Ad Hoc
Network Type
.
and set the Value to match
SSID
and set the Value to
SSID
and make sure it is disabled.
tab and make sure the network card or
to close the network card's
OK
tab
and set the
13
-