Setting Up Pc Link - Sharp CE-LK1P Operation Manual

1 Installing the PC LINK Software
1. Start Windows.
2. Insert the attached floppy disk in the floppy disk drive.
3. Click the Start button, and then select Run.
4. Enter "Setup" followed by the path name of the location where the setup program
is saved.
For example, type "a:\setup".
5. Click on the OK button.
The Setup screen appears, then follow the screen instructions for setup.
After completing the setup, the SHARP-PC LINK for EL-94xx_96xx folder is added
in the Program folder of the Start menu.
6

Setting UP PC LINK