Manual Tune - Sharp FV-DB2E Operation Manual

Listening to the DAB (continued)
FV-DB2E
" Selecting a station in the station list
Once a DAB station is received, you can select stations in the sta-
tion list.
1
Press the BAND button until "DAB" appears on the display.
2
Whilst receiving a DAB station, move the operation lever
toward TUNING UP or TUNING DOWN to select the desired
station.
! The upper part of the display shows the current station
name, and the name of the station being scanned (with "
") appears in the lower part.
The current station name
The name of the station being scanned
! If a station has one or more secondary
services, " " appears after the station
name. This indicates a secondary ser-
vice is also available.
! Whilst selecting a secondary service,
" " appears before the station name.
This indicates a primary service is also
available.
3
Within 30 seconds, press the ENTER button.
! When the current station is primary with secondary, "P" lights
up.
! When the current station is secondary, "S" lights up.
! When the current station is primary without other services,
no indicator lights up.
Note:
Inactive stations cannot be received by Auto tune ("Not available"
appears). Tune in manually by adjusting the aerial direction.
10

" Manual tune

You can manually store stations which Auto tune cannot find. If
reception is poor, you can adjust the sensitivity.
Manual tune is only available after Auto tune. Perform Auto tune
first.
1
Press the BAND button until "DAB" appears on the display.
2
Press the MENU button repeatedly to
select "Manual tune".
3
Within 30 seconds, press the ENTER
button.
4
Within 30 seconds, move the operation
lever toward TUNING UP or TUNING
DOWN to tune in to the desired station.
5
Within 30 seconds, press the ENTER button.
! Reception sensitivity appears. The
white block indicates the minimum re-
quired level and the solid blocks indicate
the current level.
! If the level is below the white block,
move the rod aerial or unit to improve re-
ception. When the level reaches the
white block, a multiplex name appears
and the multiplex will be added to the
service list.
Exiting Manual tune:
Press the ENTER button to exit manual tuning.
05/4/21 FVDB2E_UK.fm
TINSEA048SJZZ