Sharp IM-DR410H Operation Manual page 51

ERROR MEANING
MESSAGES
" Poor connection of the digital cable.
NO SIGNAL
" No output signal comes out from the
connected unit.
(Use the AC power for the connected unit.)
" The input signal has improper sampling
frequency.
" You tried to record on a playback-only
PLAY MD
disc.
" AC adaptor other than specified.
POWER?
" The write protection tab of a MiniDisc is
PROTECTED
set to the protected position.
" Since a track number is currently being
SORRY
located or updated, the unit cannot ac-
cept your command.
(Wait a while and try the operation again.)
IM-DR410H TINSZ0960AWZZ
ERROR MEANING
MESSAGES
" The temperature is too high.
TEMP OVER
(Turn off the power, and wait a while.)
" There is an error in the recording sig-
TOC FORM
(**) nal.
(Erase all of the tracks, and then record
again.)
" There is no space left for recording
TOC FULL
character information (track names,
disc names, etc.).
" The track has been protected from be-
Tr. Protect
ing erased.
(Edit the track with the device on which it
was recorded.)
" A disc which contains data other than
? DISC
music was played.
(A disc which contains nonmusic data can-
not be played.)
" There is an error in the signal recorded
on the disc.
A number or symbol appears in (*) position.
03/7/21 IM-DR410H_SEEG_E.fm
IM-DR410H
ENGLISH
E-44