8. Build the Storage System
Confirm Available Space
Use the information you gathered earlier on the planning worksheets to complete the following
tasks. These tasks must be completed before users can access storage:
Confirm available space
I
Create LUN(s)
I
Create volume group(s)
I
Create and start failover packages
I
Create file volumes
I
Assign shared access
I
1.
Select the Storage Tab in Command View NAS to define initial storage system settings.
2.
Select Storage Array Summary.
Figure 15
Storage Array Summary
3.
Compare the figure in the
planning worksheet.
4.
Adjust the planned space allocations for LUNs, Volume Groups, and File Volumes on the
storage planning worksheet if necessary.
Unallocated column to the available space on the storage
Installation Guide
45