Intel
NM10 series Motherboard
®
SATA RAID User Manual
Users can set SATA RAID configuration through JMicron HW RAID Manag-
er. Please note that your system must have more than two SATA Hard disks
to set SATA RAID configuration.
JMicron HW RAID Manager
Note: Before using JMicron HW RAID Manager configuration, you must have
installed the JMB36X driver and JMB RAID Manager.
Introduction of JMicron HW RAID Manager
1.
Double click the JMicron
2.
The window of JMicron HW RAID Manager will appear. Click the icon
then RAID and Disk Information will display.
3.
Click the icon
46
icon in the lower right corner of the window.
®
, then Event Log Viewer will display.
,
Need help?
Do you have a question about the NM10-DTX WiFi and is the answer not in the manual?
Questions and answers