Download Print this page

Craftsman 320.74431 Operator's Manual page 6

4.0-volt lithium-ion cordless pruner

Advertisement

indicated elsewhere
in this manual.
Do not charge tool in rain, or in wet locations.
Do not use a battery-operated
tool in rain.
Do not attempt to remove cut material or hold the material to be cut when
blades are moving. Make sure the switch is off when clearing jammed
material
from blades. Do not grasp the exposed
cutting blades or cutting edges when
picking up or holding the hedge trimmer.
_i,
CAUTION:
blades coast after turning off.
• When the tool is stored or is not in use, always attach the blade cover on the
blade to prevent the operator from injury.
_i,
CAUTION:
Do not attempt to operate this tool until you have read all
instructions,
safety rules, and warnings thoroughly.
Failure to comply may result
in fire, electric shock, or serious personal
injury. Keep the Operator's
Manual for
future reference,
and review it frequently.
SPECIFIC
SAFETY
RULES FOR CORDLESS
PRUNER
Use the attachment
and accessory
recommended
by the manufacturer.
• Take care to avoid cutting electrical
wires that may be hidden.
_i,
WARNING:
Use any other accessory
or attachment
may increase the risk of
injury.
• This tool is not intended for use by persons
(including
children) with reduced
physical, sensory or mental capabilities,
or lack of experience
and knowledge,
unless they have been given supervision
and instruction
concerning
use of the
tool by a person responsible
for their safety. Children should be supervised
to
ensure that they do not play with the tool.
Children should never be allowed to operate the tool; it should never be left
unattended
and when not in use should be stored in a locked place out of the
reach of children.
Don't use the tool or perform battery charging operations
in the rain.
Don't leave the tool in rain or wet locations.
Keep bystanders
well away from your work area.
Be careful not to catch foreign
matter between the blades. If the blades are
jammed
with foreign matter, immediately
switch off the tool. Then remove the
foreign matter from the blades.
Keep your free hand away from the cutting area. Never touch the blades. They
are very sharp and you may cut yourself.
Be vigilant when operating
to ensure that the fingers on the hand used to hold
or move twigs to be pruned are not exposed
to the cutting blade.
Don't force the tool to make it cut. You could injure yourself or cut something
else unintentionally.
• Always check the blades carefully before operation;the
blade must be sharp
Page 6
74331
Manual_4V
Pruner_09
1203

Advertisement

loading